EPLBCYLINDRICAL LINEAR POTENTIOMETER MAIN FEATURES EPLB is an absolute linear potentiometer transducer. Mechanical mounting is made simpler by the presence of two spherical joints on the two sides and by the enclosure's cylindrical shape. The main characteristic is the absence of variations on the electrical output signal outside of the theoretical electrical stroke. Thanks to its robustness and precision EPLB represents a great solution in most mechanical application for automation. SERIES cylindrical linear potentiometer model EPLB STROKE mm from 50 to 750 see table for stroke availability ENCLOSURE RATING IP 65 S TRAVEL SPEED max speed 5 m/s 5 OUTPUT TYPE cable (standard length 1 m) P 3 pin connector C3 DIN 43650-C 4 pin connector C4 M16 DIN 45322 5 pin connector C5 OUTPUT DIRECTION radial R © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 194

ELECTRICAL SPECIFICATIONS Important: datas are valid if the transducer is used as a ratiometric device with a maximum applicable current < 0,1 pA. ■ female connector not included, for ordering P/N please refer to Accessories section C4 connector (4 pin) DIN 43650-C solder side view FV C5 connector (5 pin) DIN 45322 solder side view FV MECHANICAL SPECIFICATIONS Installation warning instructions: ■ connect the transducer according to the reported connections ■ DO NOT use it as a variable resistance ■ the transducer calibration has to be done setting the stroke in order to have an output signal...