*mydirectindustry

EMSPS

Product catalog summary

Main Characteristics: The EMSPB is an absolute linear magnetostrictive transducer with an analogue interface, designed for high performance in speed and precision without wear and deterioration due to the absence of electrical contact. It is reliable and easy to install, even in environments with mechanical stress, shocks, or high contamination, thanks to its compact and rugged design.

Ordering Code: The transducer is identified by the code EMSPB, with options for stroke lengths from 50 to 1500 mm, enclosure rating of IP 65, output signals of 0.1 to 10.1 VDC or 4 to 20 mA, a maximum travel speed of 10 m/s, and output types including DIN 43650-A 4 pin or M12 5 pin connectors.

Mechanical Specifications: The transducer supports strokes from 50 to 1500 mm, with an enclosure rating of IP 65. It can handle a maximum travel speed of 10 m/s, acceleration up to 100 m/s², and withstands shocks of 100 G and vibrations of 12 G. The housing is made of anodized aluminum and Nylon 66 G 25, with a floating cursor type.

Electrical Specifications: The resolution is virtually infinite, with output signals of 0.1 to 10.1 VDC or 4 to 20 mA. It requires a power supply of 19.2 to 28.8 VDC, with a current consumption of up to 60 mA. The transducer offers protection against overvoltage, polarity inversion, and power supply on output, with electrical insulation of 50 VDC.

Connections: The transducer uses C4 4 pin or S5 M12 5 pin connectors, with specific pin assignments for power and output. Installation requires careful alignment and distance maintenance from the transducer surface, with a provided installation kit.

Catalog excerpts

EMSPBLINEAR MAGNETOSTRICTIVE TRANSDUCER WITH ANALOGUE OUTPUT MAIN CHARACTERISTICS EMSPB is an absolute linear magnetostrictive transducer with analogue interface. Thanks to the absence of electrical contact on the enclosure there is no issue of wear and deterioration during working life. Magnetostrictive technology guaranties great performances of speed and precision. High reliability and simple installation even for applications with mechanical stresses, shocks or high contamination are assured by the compact size and the rugged enclosure. SERIES linear magnetostrictive transducer with analogue output EMSPB STROKE mm from 50 to 1500 see table for stroke availability ENCLOSURE RATING IP 65 S OUTPUT SIGNAL 0,1 ... 10,1 VDC / 1 cursor (standard) 10S 4 ... 20 mA / 1 cursor 20S TRAVEL SPEED max speed 10 m/s 10 OUTPUT TYPE DIN 43650-A 4 pin connector C4 M12 5 pin connector S5 OUTPUT DIRECTION axial A © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 203

Open the catalog to page 1

Closing force < 0,24 Nm' connector not included, for ordering P/N please refer to Accessories section ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS CONNECTIONS C4 connector (4 pin) M12 connector (5 pin) DIN 43650-A M12 A coded solder side view FV solder side view FV Installation notes For multi-cursor model, the cursors have to work in the same conditions of distance and temperature. Cursors must be installed on a support made of non-magnetic material (like brass, aluminium or AISI316 stainless steel). The installation kit provides two screws, two nuts and two washers (all made of brass). The...

Open the catalog to page 2

All Eltra S.p.a. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list