EL - ER 38 F / GBLIND HOLLOW SHAFT INCREMENTAL ENCODER MAIN FEATURES Miniaturized encoder series for general factory automation applications, small AC motors and gearmotors. • 3 channel encoder (A / B / Z) up to 14400 ppr • Power supply up to +28 VDC with several electronic interfaces available • Up to 220 kHz output frequency • Cable output, connectors available on cable end • Metal cover for high IP enclosure rating • Blind hollow shaft diameter up to 10 mm • Mounting by stator coupling or anti-rotation pin SERIES incremental encoder series EL incremental encoder series ER MODEL blind hollow shaft with stator coupling 38F blind hollow shaft with anti-rotation pin 38G RESOLUTION ppr from 1 to 14400 see table for pulses availability ZERO PULSE without zero pulse S with zero pulse Z POWER SUPPLY (with L electronic interface) 5 V DC 5 (with L or PC electronic interface) 8 ... 24 V DC 8/24 5 ... 28 V DC 5/28 ELECTRONIC INTERFACE (max 2500 ppr) NPN N (max 2500 ppr) NPN open collector C push-pull P push-pull protected (AEIC-7272) PC line driver L power supply 5/30V - output RS-422 RS BORE DIAMETER mm 6 mm 8 9,52 (3/8”) mm 9 mm 10 ENCLOSURE RATING IP 64 X IP 65 S MAX ROTATION SPEED 3000 rpm 3 OUTPUT TYPE radial cable (standard length 0,5 m) PR VARIANT custom version XXX © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 50

ELECTRICAL SPECIFICATIONS *output levels according to power supply, for further details please see under Technical basics section anti-rotation pin is included in model G, for mounting instruction please refer to product installation notes © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 51