EL - ER 30 E / H SOLID SHAFT INCREMENTAL ENCODER MAIN FEATURES Miniaturized 0 30 mm encoder series for application in small devices. Recommended when a minimal size is required even providing excellent performances. 3 channel encoder (A / B / Z) up to 2500 ppr Power supply up to +28 VDC with several electronic interfaces available Up to 220 kHz output frequency Cable output, connectors available on cable end Solid shaft diameter up to 6 mm Mounting by clamping or threaded flange SERIES incremental encoder series EL incremental encoder series ER MODEL clamping flange 0 15 mm 30E M18 threaded flange 30H RESOLUTION ppr from 1 to 2500 see table for pulses availability ZERO PULSE without zero pulse S with zero pulse Z POWER SUPPLY (with L electronic interface) 5 V DC 5 (with L or PC electronic interface) 8 ... 24 V DC 8/24 5 ... 28 V DC 5/28 ELECTRONIC INTERFACE NPN N NPN open collector C push-pull P push-pull protected (AEIC-7272) PC line driver L power supply 5/28V - output RS-422 RS SHAFT DIAMETER (mod. E) mm 4 mm 6 ENCLOSURE RATING IP 54 X MAX ROTATION SPEED 3000 rpm 3 OUTPUT TYPE axial cable (standard length 0,5 m) PA radial cable (standard length 0,5 m) PR VARIANT custom version XXX © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 21

ELECTRICAL SPECIFICATIONS *output levels according to power supply, for further details please see under Technical basics section © Copyright 2016 Eltra S.p.a. Unipersonale. All rights reserved. All informations in this catalog are subject to change without notice. Eltra takes no responsibility for typographic errors. For the terms of sales please check the website. REV. 160607 22