Carbon / Hydrogen / Sulfur Analyzers ELEMENTRAC C(H)S-r
16Pages

ELEMENTRAC CS-r ELEMENTRAC CHS-r EXCELLENCE IN ELEMENTAL ANALYSIS

ELTRA becomes ELTRA GmbH imetric analyzer Autocleaner and ELEMENTRAC CS-r & CHS-r

ELTRA – ELEMENTAL ANALYZERS EXCELLENCE IN ELEMENTAL ANALYSIS Eltra GmbH in Haan, Germany The history of ELTRA GmbH began in 1981 with the development ELTRA has been part of the Verder Group since 2012 and con- of a carbon / sulfur analyzer for metals. Right from the start cus- sistently invests in research and development. With the launch tomer requirements were a priority, ensuring that ELTRA analyzers of the ELEMENTRAC series with powerful ELEMENTS software, are easy to operate, have a long service life and provide reliable and ELTRA offers analyzers for fast and reliable O/N/H and C/S...

SOLUTIONS FOR CS AND CHS ANALYSIS IN PREDOMINANTLY ORGANIC MATERIALS COMBUSTION ANALYZERS ELTRA ELEMENTRAC CS-r AND CHS-r For the safe, precise and reliable analysis of carbon (C), sulfur (S) carbon and sulfur measurement over a very wide concentration and hydrogen (H) in predominantly organic matrices such as soils, range. Both the ELEMENTRAC CS-r and the ELEMENTRAC CHS-r waste, wood, oil, coal and coke, ELTRA GmbH offers two different use a horizontal resistance furnace with ceramic tube, which op- combustion analyzers with IR detection. erates in a range from 600 °C to 1550 °C. The...

SOLUTIONS FOR YOUR REQUIREMENTS The analyzers of the ELEMENTRAC CS-r / CHS-r series can be configured in different ways to enable efficient analysis as required. Various combinations of elements, number of IR cells and options give the user flexibility. For specific measuring tasks (e. g. sulfidic ores) ELTRA offers analyzers with a robust measuring range. ELEMENTRAC CS-r Furnace & delivery scope ELEMENTRAC CHS-r Combustion analyzer: resistance furnace with ceramic tube (600-1550°C) and leak test, as well as sample port for low blank value, 2 moisture filters and IR detection. Available...

ANALYSIS IN THE RESISTANCE FURNACE BENEFITS ELEMENTRAC CS-r/CHS-r I Fast, simultaneous measurement of C;S and H I High sample weight possible I Optimized (low blank) sample port I IR path made of solid gold for extended lifetime I Wide measuring range from 20 ppm to 100%

ELEMENTRAC CS-r AND CHS-r STEP 1: LOGGING THE SAMPLE INTO THE ELEMENTS SOFTWARE OPERATION AND ANALYSIS PROCESS STEP 2: WEIGHING THE SAMPLE The sample ID is logged into the software and the weight is auto- Sample volumes of 50 mg to 500 mg are typical for C/S and C/H/S matically transferred (see step 2). analysis. The sample is directly applied to a sample carrier (ceramic or Inconel boat) and analyzed without addition of accelerators. The ELEMENTRAC CS-r and CHS-r determine the elements carbon, hydrogen and sulfur by combustion of the sample in an oxygen stream and subsequent measurement of...

INCLUDED: TWO COLUMNS OF ANHYDRONE INCLUDED: LOW BLANK SAMPLE PORT For reliable analysis of carbon and sulfur, the combustion gas- The ELEMENTRAC CS-r and CHS-r series ensures safe and precise es must be freed from water vapor prior to IR detection. The analysis even of samples with low carbon content in the resist- ELEMENTRAC CS-r and CHS-r have two drying columns filled ance furnace. Due to the optimized geometry of the sample port with magnesium perchlorate to reliably prevent absorption ef- with reduced diameter, as well as an oxygen purge at the sample fects in large sample volumes. In...

only CHS-r only CHS-r Nominal weight Nominal analysis time Chemical reagents NaOH on carrier (Ascarit), Magnesium Perchlorate (Anhydrone) Resistance; horizontal, ceramic tube, 600 – 1550 °C Ambient temperature Allowed humidity OPTIONAL SOLUTIONS FOR TOC/TIC ANALYSIS ACCORDING TO DIN EN 15936 Depending on the sample, carbon can also be present in the two different fractions TOC (Total Organic Carbon) and TIC (Total Inorganic Carbon). The ELTRA TIC module determines the TIC content when combined with the ELEMENTRAC CS-r and CHS-r via acidification and thus enables reliable, direct TIC...

OPERATION ELEMENTRAC CS-r AND CHS-r I EXTERNAL MONITOR AND KEYBOARD I OPTIONAL TOUCHSCREEN I OPTIONAL MONITOR HOLDER

STANDARD-COMPLIANT OPERATION Regardless of the design of an ELEMENTRAC CS-r or CHS-r, both analyzers meet the requirements of applicable standards such as ASTM and/or DIN EN ISO. The following standards are supported, among others: Sulfur in petroleum products Soil quality – determination of total sulfur Test for carbon black – sulfur content Solid mineral fuels – determination of sulfur Sulfur in coal and coke Total, combustible, and carbonate carbon in solid residues from coal and coke carbon (TOC) Direct TIC measurement via optional TIC Module Carbon content in carbon black feedstock...

The C/S and C/H/S analyzers of the ELEMENTRAC series are controlled by the innovative ELEMENTS software. All essential functions are found in the main window (analyses and results), while subordinate functions such as application settings or device status can be accessed in further windows. All settings can be controlled and changed using the PC mouse, function keys or directly on the touch screen. Clear display of measured samples and samples to be analyzed, Comprehensive diagnosis screen for monitoring all relevant tech- analysis graphs and calibration functions in one window nical...

ELEMENTS REPORT DESIGNER The Report Designer interface allows convenient editing of tables, as well as adding images and diagrams. ELEMENTS SOFTWARE SELECTED FUNCTIONS Measured values can also be given as CO2, SO3 or SO4 values, as well as with and without statistics. All elements can be freely arranged on the surface. The ELEMENTS software is characterized by quick usability, a clear structure and high security. Special strengths include reporting options and adaptation to different languages. THE ELEMENTS SOLUTION FOR DIFFERENT LANGUAGES Operating a software in a foreign language can lead...

ELEMENTRAC CHS-r AND CS-r For the ELEMENTRAC CS-r and CHS-r, ELTRA provides an extensive collection of application notes, which contain the specific analysis steps, instrument settings and measurement data for each sample to be analyzed. Mean value Furnace temperature Sample weight Analysis time ELTRA application note Mean value Hydrogen Green Peak Sulfur Blue Peak Furnace temperature Sample weight Analysis time ELTRA application note Blue Peak Green Peak