IBExU Institut fur Sicherheitstechnik GmbH An-Institut der TU Bergakademie Freiberg [I] EC-TYPE EXAMINATION CERTIFICATE according to Directive 94/9/EC, Annex III (Translation) [2] Equipment and Protective Systems intended for use in Potentially Explosive Atmosphres, Directive 94/9/EC [3] EC-Type Examination Certificate Number: IBExU04ATEX1005 X [4] Equipment: Connection sleeve type 0X81110 [5] Manufacturer: eltherm Elektrowrmetechnik GmbH [6] Address: Ernst-Heinkel-StraRe 8-10 D-57299 Burbach [7] The equipment mentioned in [4] and any acceptable variation thereto are specified in the schedule to this EC-Type Examination Certificate. [8] IBExU Institut fur Sicherheitstechnik GmbH, NOTIFIED BODY number 0637 in accordance with article 9 of the Council Directive 94/9/EC of 23 March 1994, certifies that this equipment has been found to comply with the Essential Health and Safety Requirements relating to the design and con蠭struction of equipment intended for use in potentially explosive atmosphres given in Annex II to the Directive. The test results are recorded in the test report IB-03-3-245 of 01 July 2004. [9] Compliance with the Essential Health and Safety Requirements has been assured by compliance with EN 50014:1997 +A1, +A2, EN 50019:2000 and EN 50281-1-1:1999. [10] If the sign X" is placed after the certificate number, it indicates that the equipment is subject to sp脩cial conditions for safe use specified under [17] in the schedule to this EC-Type Examination Certificate. [II] This EC-Type Examination Certificate relates only to the design and construction of the specified equipment. If applicable, further requirements of this directive apply to the manufacture and supply of this equipment. [12] The marking of the equipment mentioned in [4] shall include the following: <> Il 2G EEx e II T6 ... T3 <S> Il 2D IP 65 TX IBExU Institut fur Sicherheitstechnik GmbH Fuchsmùhlenweg 7 - D-09599 Freiberg Phone: 00493731 3805-0 - Fax: 00493731 23650 Authorised for certifications -Explosion protection- Freiberg, 01 July 2004 By order Certificates without signature and seal are not valid. Certificates may only be duplicated completely and unchanged. In case of dispute, the German text shall nrevail (Dr. Lʹsch) - Seal- (ID no. 0637 ] Schedule page 1 of 2 IBExU04ATEX1005 X

IBExU Institut fur Sicherheitstechnik GmbH An-Institut der TU Bergakademie Freiberg [13] [14] [15] Schedule to the EC-TYPE EXAMINATION CERTIFICATE IBExU04ATEX1005 X Description of equipment The Connection sleeve type 0X81110 serves to make the electrical connection between EC-type tested single wire heating conductors in potentially explosive atmosphres. It consists of a cylindri-cal bushing of PEEK with integrated cable entries. Operating temprature range of the used materials: Maximum permissible stagnation temp詩rature: -32 °C up to +200 °C Temprature class up to 10 A up to 15 A up to 20 A...