Freeze prevention Temperature maintenance Silos, vessels, tanks Chemistry and Petrochemistry Oil and Gas Industry Power plants Water and sanitation utilities Benefits Seven nominal outputs Moisture proof Resistant to chemicals Use in hazardous areas Nickel plated copper, 1.23 mm² 2 Self-regulating heating element 3 Insulation Protective braid (Cu, nickel plated) BOT Protective braid, Fluoropolymer outer jacket Class I Div 2, Groups A, B, C, D; T2B/T6 Class II Div 1, Groups E, F, G; T2B/T6 Class II Div 2, Groups E, F, G; T2B/T6 Class III Div 1, T2B/T6 Zone 1, AEx 60079-30-1 IIC T6 Gb; T2B/T6 Zone 1, Ex 60079-30-1 IIC T6 Gb; T2B/T6 Checklist ELSR-SH+ Power Connection & End Termination EL-HAZELECT Heater entry kit for Div1 rated junction box, 3/4“ NPT, for ELSR-SH+, Division 1 rated Power Connection Kit for ELSR-SH+ with nickel plated cable gland, M20x1,5, for classified locations, Ex d e Power Connection Kit for ELSR-SH+ with nickel plated cable gland, 3/4“ NPT, for classified locations, Ex d e Power Connection Kit for ELSR-SH+ with nickel plated cable gland, 1/2“ NPT, for classified locations, Ex d e Silicone termination cap for ELSR-SH+, red, cold assembly *1with termination kit part no. 09CA051 *2Please note certificate for the respective Temperature Classes of each cable system; ELSR-SH+-20/30-2-BOT only to be used in controlled or stabilized design

Technical Information Max. continuous exposure temperature (power on) Max. continuous exposure temperature (power off) Nominal voltage Usage rating Heating Circuit Length Switch on Nominal temperature CB rating Ordering Information Type Nominal output [@ 50°F / @120V;230V] 864302BA310XX data sheet ELSR-SH+ EN - Technical alterations reserved *1 Heating circuit lengths on the following conditions > 230 VAC (Type BA310XX3), 120 VAC (Type BA310XX1) y Delayed action circuit breakers (C-characteristic) with 80 % max. load y Maximum 10 % line voltage drop on heating cable bus wire y Power connection...