Eltex Yarn Expert - EyETM Tension monitoring for multiple yarn applications INFO LEAFLET Eltex EyETM greatly helps increase the quality of warp beams or yarn packages by monitoring all yarn tension in real time. The result is fewer problems, not only when warping and winding, but also in the next step when weaving or tufting. The EyETM system monitors the yarn tension on all positions in real-time. A minimum and maximum allowable tension value can be set. If any yarn’s tension is outside these values the operator can be warned or the machine can be stopped. The system can also be set to stop if a yarn’s tension value has exceeded the warning level for a pre-set amount of time. Selection view Right side High warning level Low warning level The yarn tension values from all yarns are continuously updated and displayed on a large screen. Tension values outside the warning level will be indicated both on the sensor’s LEDs and on the screen. It is possible to expand a selection of the display to have a detailed view including the position ID and the cN value for the yarns in this sect

EyETM Features • One system can have up to 96 tension sensors. The tension sensors are available with 1, 8, 10 or 12 positions. A maximum of 1152 yarns can be monitored. Guide eyelets 6 mm diameter, of quick thread or closed type. Distance between yarn positions with multi position sensors is 16 mm. When mounted side-by-side the distance between two nearby positions is 25 mm. Minimum distance between yarn positions with single sensors is 20 mm. The sensors detect changes in yarn tension quickly. How quickly the system should react to the change is adjustable. Both warning and stop limits are...