Eltex Yarn Expert Yarn Break Detection System INFO LEAFLET The Eltex EYE is a flexible system designed for yarn break detection on textile machines. It is designed to improve product quality and machine efficiency. Operator Terminal The touch screen operator terminal has a very user-friendly interface. Information about amount of yarns in operation and positions of yarn faults is clearly displayed. Style changes are quickly made by the press off the learn button. • Fast stop for yarn break • Fast learning of positions in use • Events are logged in real time for statistics and diagnostics • I/O for one to six independent machines • Simple installation, service friendly, self diagnostic • Modern, smart and proven bus system • Networkable Master control unit The master control unit is communicating with the sensors and the operator terminal. It is processing all the data and makes stop and lamp indication signals in case of a yarn fault. The sensors use the well proven piezoelectric principle. They are robust and can work with a wide range of yarns and are not influenced by dust, dirt, humidity or ambient light. All components of the system are wired together with our smart and proven bus systems. The sensors are available with 1, 8, 10 or 12 eyelets. Further advantages • The stop position is shown both on the terminal and on the sensor • Automatic addressing of all the system parts • Ability to show user defined yarn position ID at yarn fault • Easy to change system configuration • The stop function can be set for immediate stop or for a stop after a certain number of yarns are missing. • Sensor parameters can be set for different groups of yarn and can also automatically change depending on machine speed Yarn break sensors • Simple connections with modular connectors • Warping creels • Winding machines • Multiaxial warp knitting machines • Heat set creels/winders • Robust sensors in metal housings • CAN Bus, Ethernet or Modbus (available for OEM interface) • Yarn preparation machines • Software updates can be quickly and easily installed

Up to 96 single sensors can be connected to one control unit. (6 buses x 16 max sensors each.) General Applications Eye Master Control unit Multi-eyelet sensors and single sensors mixed. Up to 6 machines can be individually controlled by one control unit. Individual run mode & stop signals Up to 72 sensors* can be connected to one control unit. Additional slave units can be added, and 72 sensors* can be connected to each. Eye Master Control Unit Eye Slave Control Unit Södra Portgatan 19, SE-283 50 OSBY, Sweden | Tel: +46 479 536300 | Email: [email protected] | www.eltex.se Eltex U.S., Inc. 13031...