Technical information SDS
4Pages

{{requestButtons}}

Catalog excerpts

Technical information SDS - 1

The Smart Discharging System is used mainly in cases where disruptive static charges need to be eliminated over medium distances. The advantages of the Smart Discharging System SDS: • integrated high voltage generation • high output voltage for medium discharge range • a long life emission tip realized with an optimized high-performance material of the emission tip • shockless - no danger of electrical shock to personnel • robust, compact design • profile easy to clean • easy installation • function and malfunction monitoring of the system with fault signal output • crosslinking of the bar in CANopen® networks Technical Information Smart Discharging System Discharging Bar SDS for 24 V DC

Open the catalog to page 1
Technical information SDS - 2

1 Connector M12 2 Operating display Status-LED 3 Operating display CANopen®-Status-LED 4 Holder EL = Installation Length AL = Active Length GL = Total Length X = Distance first resp. last tip (depending on the operating space)

Open the catalog to page 2
Technical information SDS - 3

The use of the SDS/N and SDS/E discharging bars depends on the material to be discharged, the process speed, the distance to the material and the required residual charge. Please contact a member of the Eltex sales team to determine the variant required for your application. The discharging bar SDS is available in 4 different variants. Different configurations with regard to operating range and/or interface are available: • Operating range SDS/N Close range: Active length: 330 mm - 3,990 mm grid spacing 60 mm SDS/E Enlarged range: Active length: 315 mm - 3,905 mm grid spacing 90 mm •...

Open the catalog to page 3
Technical information SDS - 4

The discharging bar SDS must be positioned such that the distance between the emission tips and the object to be discharged is smaller than the distance to the grounded machine components, in simpler terms, this corresponds to a circle with a radius R around the emission tips. Technical data discharging bar SDS Supply voltage Input Current Power Input Output voltage Working distance Ambient operating temperature Storage temperature Ambient humidity Short-circuit / tip Fault signal output Circular connector Protection class Mounting material Dimensions 24 V DC ±10 % max. 0.5 A max. 12 W...

Open the catalog to page 4

All Eltex-Elektrostatik-GmbH catalogs and technical brochures

  1. Brochure ESA

    15 Pages

  2. Brochure SDS

    4 Pages

  3. Brochure RX3

    3 Pages

  4. Brochure SCC

    3 Pages

  5. Brochure MTS

    3 Pages