The Series RG52 discharge bars are designed for the passive discharging of disruptive static charges which develop in production processes. The bars are designed for discharging moving surfaces. The optimized geometrical layout of the tips guarantees effective passive discharging. The passive discharge bar RG52 is used especially in the processing of electrically conductive substrates or substrates coated with conductive material, such as metal foils, metal composites or metallized surfaces. The advantages of the RG52 discharge bars: • high passive discharging power due to an optimized tip layout • reliable safety due to resistively isolated grounding tips • flexible installation • as a passive device, the discharge bar is suitable for use in explosion hazard areas Technical Information Series RG52 Passive Discharge Bars

1 Bar profile 2 Resistively isolated grounding tips 3 Ground cable 4 Bend-resistant screw connection 5 Assembly groove at the rear RG52 discharge bar:: fixed connection of the ground cable, axial design max. active length: 5,940 mm grip spacing of tips: 30 mm

Electrode (bar) element Encapsulation material Emission tips Installation material Operating ambient temperature Ambient humidity Dimensions Weight glass-fibre-reinforced plastic GRP polyurethane, UL-94 V-0 stainless steel plastic sliding nuts 0...+80°C (+32...+176°F) max. 70% RH, non-dewing profile: 16 x 32 mm, max. length RG52: 5,980 mm, R51A: 5,990 mm approx. 0.75 kg/m C€ Dimensions

Eltex offices and agencies The addresses of all Eltex agencies can be found on our website at www.eltex.com eltex electrostatic innovations eMail [email protected] Internet www.eltex.com A >