Catalog excerpts
The Series R60 discharging bars flexION are designed for the active discharging of disruptive static charges which develop in production processes.The bars are operated with an alternating voltage of 5 kV at 50 / 60 / 100 Hz and are designed for discharging moving and non moving surfaces. Due to differences in the surface charge profiles on different materials, charges with both polarities are provided by the discharging bars. The corona section with its optimized geometrical configuration ensures ultimate discharging efficiency. The advantages of the flexION discharging bars: • high discharge range at minimum operating high voltage, hence great depth effect • excellent active discharging performance at close and far range due to patented bar design • flexible, free-standing emission tip with new resistance technology, no danger of injury, e.g. during cleaning • 4 times more emission tips compared to other products • high level of safety due to passive discharge even when the power supply is off • variable use in tight, grounded machine spaces • easy to clean thanks to an extremely hard, dirt-resistant surface Technical Information flexION Discharging Bars flexION air Discharging Bars Series R60 for AC Operation Series R60L for AC Operation TI-en-2082-1808
Open the catalog to page 11 high voltage connection 2 bracket 3 emission tips / spring tips 4 ground connection EL = installation length AL = active length GL = total length flexION discharging bar • fixed connection of the high voltage cable • high voltage cable axial and radial design • radial connection rotatable by 360° and locked by lock nut • max. active length: 3,975 mm • grip spacing of the discharging tips: 15 mm active length minus 15 must be devisible by 30; AL = 15 + (n x 30)
Open the catalog to page 2Technical specifications flexION R60 Bar element Encapsulation material Emission tips Installation material Operating ambient temperature Ambient humidity Dimensions Weight Operating voltage High voltage supply High voltage connection Short-circuit current / tip Contact protection aluminium mit special coating polyurethane, UL-94 V-0 stainless steel, flexible glas fiber reinforced plastic bracket 0...+80°C (+32...+176°F) max. 70% RH, non-dewing profile: 20 x 29 mm, max. length: 4,045 mm approx. 1 kg/m max. 5 kV AC, 50 / 60 / 100 Hz via Eltex power supplies high voltage cable encapsulated,...
Open the catalog to page 31 high voltage connection 2 bracket 3 emission tips / spring tips 4 ground connection 5 air connection 6 additional air connection EL = installation length AL = active length GL = total length flexION air discharging bar • fixed connection of the high voltage cable • high voltage cable axial and radial design • radial connection rotatable by 300° and locked by lock nut • max. active length: 2,715 mm • grip spacing of the discharging tips: 15 mm active length minus 15 must be devisible by 30; AL = 15 + (n x 30) Additional advantages of the discharging bar flexION air: • More efficient, best...
Open the catalog to page 4Dimensions of the flexION air R60L discharging bar - shown with standard bracket Technical specifications flexION air R60L Bar element Encapsulation material Emission tips Installation material Operating ambient temperature Ambient humidity Dimensions Weight Operating voltage High voltage supply High voltage connection Short-circuit current / tip Contact protection Air supply Air connection Air pressure Air consumption / meter (standard values) aluminium mit special coating polyurethane, UL-94 V-0 stainless steel, flexible glas fiber reinforced plastic bracket 0...+80°C (+32...+176°F) max....
Open the catalog to page 5Connecting oil and waterfree compressed air supply The number of air connections depends on the length of the discharging bar. An internal hose diameter of 10 mm (DN10) is required to connect the air hose to the air hose joint. The operating pressure must not exceed 1 x 105Pa and must be measured near the air distributor. The distributor crosssection must be dimensioned to match the number of hose connections or in compliance with the consumption volume. Installation diagram for the air supply 1 Pressure gauge (*not shown) 2 Pressure source 3 DN20 hose 4 Throttle valve 5 Rota flowmeter 6...
Open the catalog to page 6Length of the high voltage cable The total length of discharging bar and high voltage cable is limited due to the loading capacity of the transformer in the power supply. The maximum loading capacity is a function of the active bar length and the length of the high voltage cables. The following figures demonstrate this principle for the ES51, ES50 and ES24 power supplies. Loading capacity of the ES51 power supply as factor of active bar length and total length of the high voltage cable Loading capacity of the ES50 power supply as factor of active bar length and total length of the high...
Open the catalog to page 7Eltex offices and agencies The addresses of all Eltex agencies can be found on our website at www.eltex.com eltex electrostatic innovations eMail static-control@eltex.com Internet www.eltex.com A >
Open the catalog to page 8All Eltex-Elektrostatik-GmbH catalogs and technical brochures
-
ELTEX CONNECTED CONTROL ECC
3 Pages
-
Technical information GNH63
56 Pages
-
Brochure ESA
15 Pages
-
Operating Manual TERRALIGHT
36 Pages
-
Brochure TERRALIGHT
3 Pages
-
Brochure Power Charger
5 Pages
-
POWER IONIZER - power supply
8 Pages
-
Technical information SDS
4 Pages
-
Brochure SDS
4 Pages
-
Technical information EXR5C
2 Pages
-
Technical information R45
2 Pages
-
Technical information RG52
4 Pages
-
Brochure flexION
4 Pages
-
Technical information CB
4 Pages
-
Brochure STATICJET RX22
3 Pages
-
Technical information RX3
4 Pages
-
Brochure RX3
3 Pages
-
Brochure BASIX
4 Pages
-
Technical information ES24
4 Pages
-
Technical information WM3000
12 Pages
-
Brochure WM3000
15 Pages
-
Technical information SCC
3 Pages
-
Brochure Discharging
7 Pages
-
Brochure SCC
3 Pages
-
Brochure Ion Blower
5 Pages
-
Brochure Discharging
7 Pages
-
Technical information R55
8 Pages
-
Technical information DM1500
8 Pages
-
Brochure DM1500
2 Pages
-
Brochure RX11
3 Pages
-
Technical information R23ATR
8 Pages
-
Brochure Charging bars
5 Pages
-
Brochure BASIX
4 Pages
-
Technical information MTS
12 Pages
-
Brochure MTS
3 Pages
-
Brochure Cable reels
4 Pages
-
Brochure Grounding General
4 Pages
-
Technical information PGT120
4 Pages
-
Technical information GHH36
20 Pages
-
Brochure GHH36
2 Pages
-
Technical information ES53
4 Pages
-
Brochure Ground clamps
4 Pages
-
Brochure Grounding General
4 Pages
-
Technical information ES51
4 Pages
-
Technical information R55
8 Pages
-
Brochure Cable reels
4 Pages
-
Brochure Grounding General
4 Pages
-
Brochure Cable reels
4 Pages
-
Brochure Grounding General
4 Pages
-
Technical information R36
8 Pages
-
Brochure Ion Blower
5 Pages
-
Brochure Terrapharm General
2 Pages
-
Brochure Grounding General
4 Pages
-
Brochure Terracap General
2 Pages
-
Brochure Grounding General
4 Pages
-
Technical information EM03
2 Pages
-
Brochure Charging bars
5 Pages
-
Brochure Ground clamps
4 Pages
-
Brochure Grounding General
4 Pages