1. Catalogs
  2. Eltex-Elektrostatik-GmbH
  3. Technical information R47 ES47

Technical information R47 ES47
1 /4Pages

Technical information R47 ES47

Technical information R47 ES47
1 /4Pages

Catalog excerpts

Technical information R47 ES47-1

To the new discharging system BASIX belong the series R47 discharging bar and the series ES47 power supply; they are designed for the active discharging of disruptive static charges which develop in production processes and for discharging moving surfaces. Due to differences in the surface charge profiles on different materials, charges with both polarities are provided by the discharging bars. The corona section with its optimized geometrical configuration ensures ultimate discharging efficiency. The advantages of the discharging sytem BASIX: • ultimate discharge range and hence enhanced depth effect • high active discharge power through patented isolated ground conductors • high safety standards through passive discharging power with deactivated power supplies • no health hazards from electric shocks when making contact with the tips • 4 high voltage outputs • stable 5 kV AC output voltage • small dimensions • easy installation Technical Information Discharging System BASIX Series R47 Discharging Bars and Series ES47 Power Supplies for AC Operation TI-en-2074-1807

 Open the catalog to page 1
Technical information R47 ES47-2

AL = active length 1860 mm max. GL = total length *M5 depending on length number of sliding nuts M5: AL of 120 - 1000 mm: 2 pieces AL of 1020 - 1860 mm: 3 pieces max. allowable distance between the sliding nuts: 1000 mm Dimensions ES47 power supply 1 ON/OFF-switch (ON = light on) 2 fuse 3 high voltage connectors 4 mains cable 5 ground connection 6 fixing clamp

 Open the catalog to page 2
Technical information R47 ES47-3

Loading capacity of the power supply as factor of bar length and and length of high voltage cable Both the lengths of the high voltage cable and of the active bars are limited. The shielded high voltage cables cause a capacitive load on the transformer inside the power supply. The maximum loading capacity is a result of the function of the total active bar length and the total length of all on power supply connected high voltage cables. The illustration opposite demonstrates this principle for the discharging bars R47. Technical specifications R47 Discharging Bar Electrode (bar) element Carrier...

 Open the catalog to page 3
Technical information R47 ES47-4

Eltex offices and agencies The addresses of all Eltex agencies can be found on our website at www.eltex.com eltex electrostatic innovations eMail [email protected] Internet www.eltex.com A >

 Open the catalog to page 4

All Eltex-Elektrostatik-GmbH catalogs and technical brochures

  1. Brochure ESA

    15  Pages

  2. Brochure SDS

    4  Pages

  3. Brochure RX3

    3  Pages

  4. Brochure WM3000

    15  Pages

  5. Brochure SCC

    3  Pages

  6. Brochure RX11

    3  Pages

  7. Brochure MTS

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.