Catalogs >
Eltex-Elektrostatik-GmbH >
Technical information R23ATR

Technical information R23ATR
8Pages

Catalog excerpts

The point charging bar R23ATR is used wherever target-specific electrostatic charges need to be applied even at high temperatures. For instance in edge trim adhesion in flat film production. Using the point charging bars R23ATR, both outer edge zones of the film are fixed directly downstream from the flat film extrusion die to prevent neck-in. The point charging bar R23ATR can be operated with one, two or three emission tips. The tips are interchangeable. The geometry of the tips is adjustable depending on application. This means that the point charging bar R23ATR may be used horizontally or vertically even in confined spaces. Technical Information

Open the catalog to page 1

R23ATR/LAAA Point Charging Bar Design left with emission tip Type A 1 Emission tips 2 Base element PU 3 GRP holder for installation (provided by the customer) 4 Cable gland 5 Prefabricated high voltage cable for connecting to the high voltage generator (accessories: not supplied) 6 Hole diagram and mounting depth of the emission tips

Open the catalog to page 2

R23ATR/RAAA Point Charging Bar Design rigth with emission Type A PLQ Emission tips Base element PU GRP holder for installation (provided by the customer) Cable gland Prefabricated high voltage cable for connecting to the high voltage generator (accessories: not supplied) 6 Hole diagram and mounting depth of the emission tips

Open the catalog to page 3

1 Emission tip Type A 2 Base element PU 3 Cable gland 4 Prefabricated high voltage cable for connecting to the high voltage generator (accessories: not supplied) 5 Emission tip Type A 2 Base element PU 3 Cable gland / cable gland glued 4 Prefabricated high voltage cable for connecting to the high voltage generator

Open the catalog to page 4

Design options of the Point Charging Bars R23ATR Design L = left (standard) R = right 3. Emission tip Plug version n.n. = detachable version Y = connection to POWER CHARGER Cable length in dm (decimeter) 5 dm steps n.n. = detachable version R23ATR point charging bar design left and right 1.3 3. Emission tip Overview of the emission tips: please see table page 8

Open the catalog to page 5

Design options of the Point Charging Bars R23ATR11 Design 3 = 30 kV 6 = 60 kV Emission tip Plug version n.n. = detachable version Y = connection to POWER CHARGER Cable length in dm (decimeter) 5 dm steps n.n. = detachable version R23ATR11 point charging bar with detachable high voltage cable 3 Cable gland: black at R23ATR and R23ATR11/3 yellow at R23ATR11/6 4 Interlock 5 Bar element Overview of the emission tips: please see table page 8

Open the catalog to page 6

Technical specifications Bar element Emission tips R23ATR: max. 3 emission tips R23ATR11: 1 emission tip exchangeable, adjustable, with insulating coating, current limited via separate resistance Ambient operating temperature 0...+120°C (+32...+248°F) in emission tip area 0...+70°C (+32...+158°F) on bar element Operating voltage High voltage power supply via Eltex high voltage generators series KNH35, KNH65 and POWER CHARGER High voltage cable Detachable cable connection: prefabricated, exchangeable high voltage cable in plastic tubing with connector for charging bar and high voltage...

Open the catalog to page 7