Many production processes and processing stages require materials to be bonded firmly for limited periods. The bonds must not leave any traces and must not be allowed to damage the material surfaces when the materials are eventually separated. The adhesion through controlled static charges provides the ideal solution in these cases: the R130A / R131A / EXR130 charging bar is designed for applying the specific charge quantity. High-resistance materials such as paper, cardboard, plastics etc. are interlocked for brief periods or fastened to conductive surfaces, without the need to use adhesives. The design of the R130A / R131A / EXR130 charging bar allows its use in perfect harmony with the intended purpose. In combination with the Eltex high voltage generator models this effective charging system ensures productivity and quality improvements in the most varied production areas. The charging bar EXR130 is available for use in the Ex zone. Technical Information

Bar R130A / EXR130 The connection of the high voltage cable can be axial or at a right angle to the bar. Bar R131A The connection of the high voltage cable is detachable and only available axial to the bar.

Technical specifications Bar element Encapsulation material Emission tips Installation material Operating ambient temperature Ambient humidity Dimensions Weight Operating voltage Operating current High voltage supply High voltage connection EX approval (EXR130) glass-fibre-reinforced plastic GRP polyurethane, UL-94 V0 special alloy plastic or metal sliding nuts R130A / R131A: 0...+60°C (+32...+140°F) EXR130: 0...+40°C (+32...+104°F) max. 60% RH, non-dewing profile: 20 x 80 mm, max. length 3,985 mm, see figure approx. 2,1 kg/m R130A3 / R131A3: max. ±30 kV R130A6: max. ±60 kV for voltages higher...

whole number, depending on active length 35 mm below 30 kV, 60 mm below 60 kV operating voltage lé ou ar able n m io sb h t lö etac tens ich l n on-d aute n eh be Ka able d c âble c AL = Active length GL = Total length EL = Installation length A Charging bar profile with 3 flutings Torque: 4,0 Nm: metallic screw and sliding nut, 0,4 Nm: plastic screw and sliding nut Secure bolts against working loose (e.g. Loctite 243) C Sliding nut Total length below 1 meter = 2 off Total length below 2 meters = 3 off Total length below 3 meters = 4 off Total length below 4 meters = 5 off Eltex-Elektrostatik-Gesellschaft...