The exr5c discharge bars Technical Information are designed for the active discharging of disruptive static charges which develop in production processes in explosion hazard area. The discharge bars and the power supply are used mainly in cases where disruptive static charges on fast-moving material webs impair production processes and need to be eliminated. The bars are operated with an alternating voltage of 5 kV at 50...60 Hz and are approved for use in explosive atmosphere. The advantages of the EXR5C discharge bar: • ultimate discharge range and hence enhanced depth effect • high active discharge power through patented isolated ground conductors • high safety standards through passive discharging power with deactivated power supplies • safety through function and malfunction monitoring • continuous assembly slotting guarantees flexible installation Series EXR5C Discharge Bars Seriex EXR50US Discharge Bars for AC Operation TI-en-2019-1605

Electrode (bar) element Encapsulation material Emission tips Installation material Operating ambient temperature Ambient humidity Dimensions Weight Operating voltage High voltage supply High voltage connection Short-circuit current/tip Contact protection EX approval glass-fibre-reinforced plastic GRP polyurethane, UL-94 V-0 stainless steel plastic sliding nuts 0...+40 °C (+32...+104 °F) max. 70% RH, non-dewing profile: 16 x 40 mm, max. length 5,980 mm, see Fig. approx. 0.8 kg/m max. 5 kV AC, 50/60 Hz via ES53/G.. or ES53/H.. or ES53/I.. Eltex power supplies h.v. cable encapsulated, axial or radial...