1. Catalogs
  2. Eltex-Elektrostatik-GmbH
  3. Technical information ES51

Technical information ES51
1 /4Pages

Technical information ES51

Technical information ES51
1 /4Pages

Catalog excerpts

Technical information ES51-1

The Essi high voltage Technical Information power supplies are power supply units for the series R5x AC discharge bars. Series ES51 Power Supplies Series ES51US Power Supplies for connection to AC discharge bars The discharge bars and the Es5i power supply are used mainly in cases where disruptive static charges on fast-moving material webs impair production processes and need to be eliminated. The Es5i power supply features the following characteristics: • 5 plug-type high voltage outputs • stable 5 kV AC output voltage • small dimensions • easy installation • protection class IP 54 design • function and pollution monitoring of the bars with floating signal contacts (optional)

 Open the catalog to page 1
Technical information ES51-2

1 Power supply lead 2 5 high voltage terminals 3 Fuse 4 ON/OFF switch (ON = illuminated) 5 Plug for function and malfunction signals* 6 Grounding terminal 7 LED red, error signal* 8 LED green, high voltage active* 9 Mounting bracket * only with function and pollution monitoring Function elements of the ES51 High Voltage Supply Loading capacity of the power supply Both the lengths of the high voltage cable and of the active bars are limited. The shielded high voltage cables cause a capacitive load on the transformer inside the power supply. The maximum loading capacity is a result of the function...

 Open the catalog to page 2
Technical information ES51-3

Supply voltage Power input Output voltage Loading capacity Output current Operating ambient temperature Storage temperature Ambient humidity Function and malfunction signals (optional) Mains power cable Fuse (primary circuit) Ground link High voltage connections Enclosure Protection class Dimensions Weight UL approval 230 V AC 50/60 Hz; 115 V AC 50/60 Hz 80 VA maximum 5 kV AC; ES51/K: 3.5 kV AC depending on length of bar and length of high voltage cable max. 6.2 mA at 5 kV ES51: 0...+60°C (+32... + 140°F); ES51US: 0...+40°C (+32... + 104°F) -20...+80°C (-4... + 176°F) max. 80% r.h., non-dewing...

 Open the catalog to page 3
Technical information ES51-4

Eltex offices and agencies The addresses of all Eltex agencies can be found on our website at www.eltex.com eltex electrostatic innovations eMail [email protected] Internet www.eltex.com A >

 Open the catalog to page 4

All Eltex-Elektrostatik-GmbH catalogs and technical brochures

  1. Brochure ESA

    15  Pages

  2. Brochure SDS

    4  Pages

  3. Brochure RX3

    3  Pages

  4. Brochure WM3000

    15  Pages

  5. Brochure SCC

    3  Pages

  6. Brochure RX11

    3  Pages

  7. Brochure MTS

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.