Portable Data Acquisition Instrument The portable Data Acquisition device TraNET® PPC is a high-precision measurement instrument. It is a very compact, all in one data acquisition solution with a high channel density. The TraNET® PPC was specifically designed for flexible portable usage in applications such as ballistics, explosive tests, acoustic emission or for any power and voltage related measurement. cording mode (ECR), blocks of data can be captured independently per channel. Adjacent blocks may be overlapping to assure that no relevant information is missing. The Scope and Multiblock measurement mode turns the PPC in a standard Oscilloscope. TraNET® PPC devices can be synchronized with other Elsys TraNET® instruments in order to build large scale systems. There are a variety of data acquisition modes available to address specific requirements. The data streaming capability allows acquiring a continuous data stream to disk. In the unique Event Controlled Re- Elsys AG Mellingerstrasse 12 CH-5443 Niederrohrdorf Switzerland Phone: +41 56 496 01 55 Email: [email protected] www.elsys-instruments.com

Data Acquisition Cards The Elsys TPCE or TPCE-LE measuring cards are used as data acquisition cards in the TraNET® PPC. The cards are stably installed in the device and optimally cooled in order to achieve stable measurement accuracy and to guarantee a long service life for the measurement cards. The TraNET® PPC can be expanded up to 24 single-ended channels or 12 differential channels. All measuring cards from the TPCE/TPCE-LE range with sampling rates from 2 to 240 MS/s per channel can be used. Single-Ended vs Differential Cards All TPCE/TPCE-LE cards are available as single-ended (SE) or differential...

4-Channel vs 8-Channel Cards 8-channel cards are less expensive, but certain resources are distributed over 8 channels that would otherwise be available for 4 channels. For example, the on-board memory for 8-channel card is only 16 MS per channel as standard and 64 MS is available as an additional option, which would be twice as much for 4-channel card. In addition, the maximum data throughput in continuous mode is 160 MS/s per card. This results in a maximum of 20 MS/s per channel for a 8-channel card and 40 MS/s for 4-channel card. 4-Channel • 32 MS per Channel • 128 MS per Channel optional...

TPCE DAQ Cards Module TypeTPCE-24016-4TPCE-12016-4TPCE-8016-4/8 TPCE-4016-4/8

Module Type

*1) At 16 Icit modules, the resolution will be reduced to 14 bits at sample rates over 1/4 of the max. sample rate. *2) The input noise depends on the sample rate. *3) At 14 bit modules the SNR will be reduced by 2 dB *4) At 8-channel modules the SNR will be reduced by 3 dB

TranAX® 4 TranAX® 4 is the universal data acquisition software from Elsys designed for all types of data acquisition cards and the turnkey TraNET® data acquisition instruments. Key Features • Configures quick and easy many analog input channels, no programming required • Data visualization in Multi-Waveform displays • Several cursor for easy data readout and reporting • X-Y data display • FFT Analysis • Spectrogram and Waterfall diagrams • Measurement data - video synchronization • More than 40 scalar functions to measure any significant waveform parameter on time or FFT curves • Powerful formula...

Additional Accessories Digital Input/Output BNC Box The BNC break-out box simplifies access to the additional digital control and marker signals. Available Signals: Trigger In, Trigger Out, Armed Out, Disarm In, Ext. Timebase In, Ext. Start In, 8x Marker In Precision High-Voltage Attenuators The precision attenuators allow measurements up to 1000 V with a much higher precision than standard oscilloscope probes. • 20 : 1, 100 : 1 and 1000 : 1 attenuators • 2 or 3 channel per box • up to 1000 V Vmax SyncLink Box To connect several TraNET® FE, EPC or PPC devices to a large measuring system, the...