TraNET ® FE 204/404 Data Acquisition Instrument The family of modular TraNET® data acquisition instruments provides turnkey solutions to many complex measurement problems. TraNET data acquisition systems are flexible, compact and portable. They can be used to solve in situ problems in many different applications like blast, ballistics, automotive, power or transportation systems. With the Continuous Data Recorder mode, a long duration event can be stored to disk, gap free in real-time, and analysed later. If applications require complex triggering across many channels, TraNET® can help you capture sequential blocks of data, without any loss, using the unique ECR Event Controlled Recording mode. The powerful application software TranAX® not only helps to quickly configure many acquisition channels, but also provides the right post-processing tools to analyse complex waveforms. The TraNET® FE 204/404 can be equipped the poweful TPCE data acquisition card and is available as 4 to 16 channel device. Larger channel counts can be realized by either synchronizing several TraNET devices or with the TraNET® FE 408 DP device which available also as 32 channel instrument. Elsys AG Mellingerstrasse 12 CH-5443 Niederrohrdorf Switzerland Phone: +41 56 496 01 55 Email: [email protected] www.elsys-instruments.com

Model Name TraNET® 204 FE Device Configurations TraNET ® FE 204 TraNET® FE 204 devices are equipped with up to two 4-channel modules or one 8-channel TPCE DAQ module. On Single Ended modules (SE), two inputs can be linked together for having a differential input. Differential ended modules (Diff) can also be used in single ended mode by using only the positive input. For more detailed information see the specification table. TraNET ® FE 404 TraNET® FE 404 devices are equipped with up to four 4-channel modules or two 8-channel TPCE DAQ modules. On Single Ended modules (SE) two inputs can be linked...

Device Synchronization The synchronization of several TraNET® FE devices has always been a strength of Elsys measuring devices. With the help of the synchronization unit SyncLink SLB-8 or SyncLink 2.0, several TraNET® FE devices can be precisely synchronized on a sample basis. Not only is the internal timebase of all devices synchronized, but trigger messages are also transmitted with sample accuracy. The latest generation MK3 of the TraNET® FE devices now also masters the network synchronization standard IEEE-1588 (PTP: Precision Time Protocol) and enables, on the one hand, much simpler synchronization...

Data Acquisition Cards The Elsys TPCE or TPCE-LE measuring cards are used as data acquisition cards in the TraNET® FE 204 and 404. The cards are stably installed in the device and optimally cooled in order to achieve stable measurement accuracy and to guarantee a long service life for the measurement cards. Single-Ended vs Differential Cards All TPCE/TPCE-LE cards are available as single-ended (SE) or differential (DIFF) versions. Depending on how many inputs are measured differentially, an SE or DIFF card is worthwhile. Single-ended cards have one BNC connector per channel where the outside...

TPCE DAQ Cards Module TypeTPCE-24016-4TPCE-12016-4TPCE-8016-4/8 TPCE-4016-4/8

Module Type

*1) At 16 Icit modules, the resolution will be reduced to 14 bits at sample rates over 1/4 of the max. sample rate. *2) The input noise depends on the sample rate. *3) At 14 bit modules the SNR will be reduced by 2 dB *4) At 8-channel modules the SNR will be reduced by 3 dB

TranAX® 4 TranAX® 4 is the universal data acquisition software from Elsys designed for all types of data acquisition cards and the turnkey TraNET® data acquisition instruments. Key Features • Configures quick and easy many analog input channels, no programming required • Data visualization in Multi-Waveform displays • Several cursor for easy data readout and reporting • X-Y data display • FFT Analysis • Spectrogram and Waterfall diagrams • Measurement data - video synchronization • More than 40 scalar functions to measure any significant waveform parameter on time or FFT curves • Powerful formula...

Additional Accessories Digital Input/Output BNC Box The BNC break-out box simplifies access to the additional digital control and marker signals. Available Signals: Trigger In, Trigger Out, Armed Out, Disarm In, Ext. Timebase In, Ext. Start In, 8x Marker In Precision High-Voltage Attenuators The precision attenuators allow measurements up to 1000 V with a much higher precision than standard oscilloscope probes. • 20 : 1, 100 : 1 and 1000 : 1 attenuators • 2 or 3 channel per box • up to 1000 V Vmax SyncLink Box To connect several TraNET® FE, EPC or PPC devices to a large measuring system, the...