TraNET ® FE 408 DP Data Acquisition Instrument The family of modular TraNET® data acquisition instruments provides turnkey solutions to many complex measurement problems. TraNET® data acquisition systems are flexible, compact and portable. They can be used to solve in situ problems in many different applications like blast, ballistics, automotive, power or transportation systems. With the Continuous Data Recorder mode, a long duration event can be stored to disk, gap free in real-time, and analysed later. If applications require complex triggering across many channels, TraNET® can help you capture sequential blocks of data, without any loss, using the unique ECR Event Controlled Recording mode. The powerful application software Elsys AG Mellingerstrasse 12 CH-5443 Niederrohrdorf Switzerland Phone: +41 56 496 01 55 Email: [email protected] www.elsys-instruments.com TranAX not only helps to quickly configure many acquisition channels, but also provides the right post-processing tools to analyse complex waveforms. The TraNET FE 408 DP is the largest device of the TraNET family and allows device configurations up to 32 channels in a very compact chassis. The Dust Proof (DP) chassis is optimized for dusty and muddy environments which makes it very suitable for outdoor blast measurements. The TraNET FE 408 DP can be equipped with up to four TPCE8016-8S-DP or TPCE-2016-8S-DP data acquisition boards.

The data acquisition cards TPCE-2016-8S-DP and TPCE-8016-8S-DP are specially designed for the 408 Dust Proof device. They are optimized for low power consumption which is necessary for the dust proof chassis and high channel count of up to 32 channels. Each channel is equipped with a programmable ICP/IEPE current source for powering active pressure or acceleration sensors. A status LED beside each BNC input indicates if ICP/IEPE is turned on and if a sensor is connected properly. The DP series data acquisition card is available with either 20 MS/s or 80 MS/s sampling rate per channel and 14/16...

TranAX® 4 TranAX® 4 is the universal data acquisition software from Elsys designed for all types of data acquisition cards and the turnkey TraNET® data acquisition instruments. Key Features • Configures quick and easy many analog input channels, no programming required • Data visualization in Multi-Waveform displays • Several cursor for easy data readout and reporting • X-Y data display • FFT Analysis • Spectrogram and Waterfall diagrams • Measurement data - video synchronization • More than 40 scalar functions to measure any significant waveform parameter on time or FFT curves • Powerful formula...

Additional Accessories The BNC break-out box simplifies access to the additional digital control and marker signals. Available Signals: Trigger In, Trigger Out, Armed Out, Disarm In, Ext. Timebase In, Ext. Start In, 8x Marker In Precision High-Voltage Attenuators The precision attenuators allow measurements up to 1000 V with a much higher precision than standard oscilloscope probes. • 20 : 1, 100 : 1 and 1000 : 1 attenuators • 2 or 3 channel per box • up to 1000 V Vmax SyncLink Box To connect several TraNET® FE, EPC or PPC devices to a large measuring system, the devices must be synchronized...