Control panels

Product catalog summary

Overview: This document provides a comparison between analogue and digital control panels used in Super Xtrafactory Devices, specifically for the Supercombinata series. It outlines the specifications, features, and operational differences between the two types of control panels.

Specifications:

Both control panels are available with a 230V power supply, with the digital panel also available in 110V upon request.
The analogue control panel is standard, while the digital control panel is optional.
Dimensions for the analogue panel are 250 x 95 x 275 mm, and for the digital panel, 273 x 142 x 250 mm.
Both panels have a protection rating of IP20.

Analogue Control Panel Features:

Includes a main switch, emergency/stop button, and analogue potentiometers for rotation and feed speed.
Features an analogue direction selector switch and a start button for rotation.

Digital Control Panel Features:

Equipped with a programmable microprocessor positioner with relay outputs.
Displays feed speed (mm/min) and rotation speed (rpm) with data retention via EEPROM memory.
Allows operation in manual or automatic mode with additional controls for setting rotational speed, direction, and feed speed.
Includes a digital feed selector, stop button, and programming button for automatic feed.

Operational Differences:

The analogue panel uses an open chain control for feed motion, while the digital panel uses a programmable microprocessor for precise control.
The digital panel allows for data retention and more advanced control options, including automatic mode operation.

Recommendations:

The choice of control unit should be made at the time of purchase to avoid the need for machine adaptation later.

Catalog excerpts

CONTROL PANELS COMPARISON BETWEEN ANALOGUE AND DIGITAL CONTROL PANEL Super Xtrafactory Devices

Open the catalog to page 1

Super Xtrafactory Devices ANALOGUE CONTROL PANEL DIGITAL CONTROL PANEL Standard on line borers of the series Supercombinata Available with 230V power supply and 110V on request On request available with the models SC1, SC2 e SC3 with 230V power supply. ROTAZIONE / ROTATION AVANZAMENTO / FEED ROTAZIONE / ROTATION www.elsasrl.com Patented and made by Elsa s.r.l. AVANZAMENTO / FEED www.elsasrl.com Patented and made by Elsa s.r.l. DIGITAL CONTROL PANEL SALDATURA / WELDING FEED MOVEMENT The feed motion (by the rotation of an independent DC electric motor with permanent magnets) is driven by an unidirectional...

Open the catalog to page 2

Super Xtrafactory Devices ROTAZIOnE / ROTRTIOn DIGITAL CONTROL PAnEL NOTES: Please note that the choice of the control unit must be made when you buy the machine. Otherwise, the machine will have to be adapted to the selected control unit type if it is later upgraded from a standard to a digital control unit.

Open the catalog to page 3

Elsa Srl Localita La Petrizia - SS 106 88050 Sellia Marina (CZ) - Italia Tel: (+39) 0961 962854 Fax: (+39) 0961 968716 [email protected] www.elsasrl.com

Open the catalog to page 4

Control panels

Control panels

Catalog excerpts

All ELSA S.R.L. catalogs and technical brochures