Tubes made from high-performance plastics Excerpt: Heat shrink Tubings and Roll covers

Heat shrinkable tubing made from POLYTETRA-FLON™-PTFE and Mold-flon™-FEP,-PFA, and -PVDF We manufacture heat shrinkable tubing from POLYTETRAFLON™-PTFE and Moldflon™-FEP, -PFA, and -PVDF. It can be used to protect against moisture, chemical liquids, corrosion, and high temperatures. When a moisture proof connection or media tight closure is required, dual heat shrinkable tubing is the number one choice. The most common shrinkage rates are: • 2:1 or 4:1 for PTFE • 1.3:1 and 1.6:1 for FEP • 1.3:1 for PFA • 2:1 for PVDF Manufacturing special sizes to meet specific customer requirements is our forte....

Polytetraflon™-PTFE heat shrinkable tubing 2:1 — AWG sizes POLYTETRAFLON™ and Moldflon™ heat shrinkable tubing can be produced in various base colors, including in accordance with the RAL or Pantone color scale. Please note that the chemical stability of colored heat shrinkable tubing changes. Benefit from our consultancy. PTFE heat shrinkable tubing 2:1 — Dimensions in mm Wall thickness after maximum shrinkage Size ID ID after max. SW = Wall TW = Wall LW = Wall Recommended expanded shrinkage thick- thickness stan- thickness thin- thickness object diameter minimum walled tolerance...

Sizes (in inches) Size PTFE heat shrinkable tubing 4:1 — Dimensions in mm ID expanded minimum ID after max. Wall thickness after Wall thickness tolerance Recommended object shrinkage max. shrinkage diameter The expanded internal 0 (and external 0) are not toleranced. The dimensions can be greater than the minimum values. Toleranced diameters can be manufactured on request. Please note longitudinal shrinkage or expansion of +/-10% may occur during the manufacturing process. The shrink temperature of POLYTETRAFLON™ and Moldflon™ heat shrinkable tubing can also vary from lot to lot and...

Dual heat shrinkable tubing tubing shrinks, it exerts a corresponding pressing Dual heat shrinkable tubing made from POLYTETRAFLON™-PTFE and Moldflon™-FEP or -PFA is specially used in applications in which the ends have to be closed in a media tight manner or water proof joints are necessary. Dual heat shrinkable tubing comprises inner tubing made from Moldflon™-FEP or -PFA and outer heat shrinkable tubing made from POLYTETRAFLON™-PTFE. The inner tubing acts as a kind of inner hot melt and liquefies when shrink fitted. During the shrinking process, the hollows are filled and, as the outer ce,...

The expanded internal 0 (and external 0) are not toleranced. The dimensions can be greater than the minimum values. Toleranced diameters can be manufactured on request. Please note longitudinal shrinkage or expansion of +/-10% may occur during the manufacturing process. The shrink temperature of POLYTETRAFLON™ and Moldflon™ heat shrinkable tubing can also vary from lot to lot and should be determined in advance during a

Moldflon™-FEP heat shrinkable tubing 1.6:1 Sizes (in inches) FEP heat shrinkable tubing 1.6:1 — Dimensions in mm Size Wall thickness after max. shrinkage Wall thickness tolerance Recommended object diameter Moldflon™-PVDF heat shrinkable tubing 2:1 Heat shrinkable tubing made from Moldflon™-PVDF is resistant to almost all chemicals and solvents and has a higher dielectric strength. Moldflon™-PVDF heat shrinkable tubing is transparent and self extinguishing, and also offers good sliding characteristics and high abrasion resistance. Sizes (in inches) PVDF heat shrinkable tubing 2:1 — Dimensions...

Moldflon™-PFA heat shrinkable tubing 1.3:1 Heat shrinkable tubing made from Moldflon™-PFA has a very high purity and greater temperature resistance than heat shrinkable tubing made from Moldflon™-FEP. It is chemically resistant and flame retardant, allows longer production lengths, and has a particularly smooth surface. AWG sizes PFA heat shrinkable tubing 1.3:1 — Dimensions in mm Size Wall thickness after Wall thickness max. shrinkage tolerance Recommended object diameter Sizes (in inches) PFA heat shrinkable tubing 1.3:1 — Dimensions in mm Size Wall thickness after max. shrinkage Wall thickness...

Moldflon™-FEP heat shrinkable tubing as splinter protection for fluorescent lamps Safety heat shrinkable tubing made from Moldflon™-FEP is specially designed to offer splinter protection for fluorescent lamps used in the food and pharmaceutical industries. The following standard sizes are available: • Poly F 5 Ø 15 mm • Poly F 8 Ø 26 mm • Poly F 10 Ø 30 mm • Poly F 12 Ø 38 mm Wall thickness 0.25 mm Special types of heat shrinkable tubing Custom covering of parts One of our core competences lies in encasing delicate technical parts with heat shrinkable tubing. We know how to professionally cover...

Technical details: Rollcovers wall thickness barrel length (measured without journal) Compared with conventional coatings, rollcovers Custom covering of parts made from Moldflon™-FEP or -PFA have the We can cover customer supplied rollers weighing decisive advantage of a very smooth surface (no microporosity). During the production process, requires it, the rollcover can also be bonded. In the user benefits from the anti-adhesiveness of the case of heavy rollers, we mount the bonded at the roller. Conventional coatings can achieve layer thicknesses of up to 100 μm, while the use of rollcovers...

Moldflon™-FEP rollcovers — Standard wall thickness 0.50 mm Rollcovers made from Moldflon™-FEP with a wall thickness of 0.50 mm are produced absolutely seamlessly up to a nominal width of 16½ inches, larger sizes with a weld seam. The wall thickness data is nominal; effective wall thicknesses vary slightly, depending on the shrinkage. Please contact us for other nominal widths. Please also get in touch with us if your rollers are at the limit range for diameter and shrinking range. Special manufacturing processes allow us to produce intermediate sizes. Depending on the application, we recommend...