TSN/Industry4.0 Telecom 5G IEC-61850 Smart-Grids MiFID II NTS-5000 Rb OCXO NTP/PTP IEEE1588 Modular Time Server PTP IEEE1588 Grandmaster NTP Time Server STRATUM-1 ePRTC * / PRTC / PRC CLOCK GNSS Jamming * Detection GNSS Spoofing * Detection ATTACK Auto-ON Holdover HOLDOVER Rubidium/OCXO PTP IEEE1588 White Rabbit * SyncE Support Expander * 1-4 NTP v4 (RFC5905-09) v3 (RFC1305) SNTP v4 (RFC4330) LAN 2x 1 0 0 M b p s s w - s t a m p s LAN 1GbE * PHY hw- s t a m p s LAN 10GbE * with s w - s t a m p s PRIVATE PTP-stack/NIC(LAN) IRIG-B AM & DCLS DCF77 decoded/RF-emulation REMOTE HTTP(S) SSH TELNET SNMPv3 MIB-2 RADIUS OUT 1PPS 1 0 M H z 2 . 0 4 8 M b p s CRYPTO M D 5 RSA D S A SSL R ED UND A NT Power Supply R ED UND A NT GNSS receivers* ELPROMA ANTI-JAMING/SPOOFING SYSTEM 100% COMPATIBLE * extra feature requiring additional hardware and firmware upgrade www.elpromatime.com e-mail: [email protected]

The NTS-5000 is Rubidium and NTS-5000LITE is OCXO holdover class network appliance. It delivers Time (ToD time of a day) and Frequency reference using NTP, IEEE1588 protocols. It stabilizes the frequency of a clock at end netowokr devices using SyncE*, PTP, 10MHz. The std. configuration includes LAN1-2 100/10Mbps upgradable to 1GbE* or 10GbE* each. Another 8x 1GbE (grouped pairs LAN3-4, 5-6, 7-8, 9-10) are available optionally too. The LAN3*-10* are special NIC network interface cards located in EXPANDERS 1-4*. They support hardware timestamping for IEEE1588 and profiles default, telecom, power,...

Clocks IEEE1588 & (S)NTP Alarm Relays IRIG-B or DCF77 2.048 MHz Master & Slave PWR A & B AM or, ITU G.703.13 HW-stamping SYNC GNSS DCLS (incl. fiber) Redundant PWR AC and/or DC from 24V to 300V Power A SATELLITE RECEIVER ANALOGUE TIME 2x (LAN1/LAN2) w software stamping IEEE1588 Profiles Hardware #Expander Supported Functionality Connector Type ETH 1GbE w/ HW-stamping => IEEE1588/SyncE/(S)NTP Master & Slave or ETH 10GbE w/ SW-stamping => IEEE1588 PTPd/(S)NTP Master & Slave Expander 1 Expander 2 Expander 3 Expander 4 ETH 1GbE w/ HW-stamping => IEEE1588/SyncE/(S)NTP Master & Slave or ETH 10GbE w/...

Network Time Protocol NTP v2/v3/v4 LAN1-2 Standard product includes 1pcs. of smart NTS-antenna. Optionally 2x antennas are supported for redundancy. The NTS-antenna includes built-in GNSS receiver. Internal accuracy of GNSS receiver is better than 5ns. Final accuracy depends on selected GNSS receiver - the replaceable module option. Elproma optionally supports anti-jamming/spoofing. # CONNECTOR #INPUT #OUTPUT TYPE IRIG-B Time Code IEEE1344 IEEE C37.128:2005 Modulated accuracy …… ±1μs Unmodulated accuracy … ±40ns Broadcast Finance** Default ITU-I G.8265.1 ITU-I G.8275.1 ITU-I G.8275.2 IEEE C37.238...

DATACOM & FINANCIAL - PopularConfigurations DATACOM1: 2x100/10Mbps (Software Time-Stamping) LAN1&LAN2 DATACOM4: 2x1GbE LAN3-4 (Hardware Time-Stamping) + DATACOM1 config DATACOM5: 4x1GbE LAN3-6 (Hardware Time-Stamping) + DATACOM1 config www.elpromatime.com [email protected]

SMART GRIDS & INDUSTRY 4.0 - Selected Configurations SMART-GRIDS1 4xIRIG-B DCLS rs422 (Expander #4) basis on DATACOM-5 conf. SMART-GRIDS2 2xDCLS Fiber 2xDCLS TTL (Exp. #5) basis on DATACOM-5 conf. SMART-GRIDS3 is a summary of 2x& 3 item above SMART-GRIDS4 is like SMART-GRIDS3 with extra 4x ALARM RELAY SMART- GRIDS CUSTOM1 - This is PTP SLAVE generating IRIG & DCF77 AM/DCLS SMART-GRIDS CUSTOM2 - This is PTP SLAVE + CUSTOMS1 (above) + 10GbE out www.elpromatime.com [email protected]

TELECOM Lte/5G - Selected Popular Configurations NTP-Server w/ PTPd support TELECOM-3 PRTC-A 2x10GbE,48VDC SW-stamping NTP-Server w/ PTPd support TELECOM-5 PRTC-A 4x1GbE HW-stamping Autonomous NTP/PTP GrandMasters TELECOM-7 PRTC-A 8xGbE HW-stamping Autonomous NTP/PTP GrandMasters TELECOM-8 PRTC-A 2x10GbE, 4xGbE HW-stamping Autonomous GrandMasters www.elpromatime.com [email protected] 1x10GbE, 4xGbE HW-stamping Autonomous GrandMasters