905U-K
1 /3Pages

905U-K

905U-K
1 /3Pages

Catalog excerpts

905U-K-1

ELPRO Technologies Description The ELPRO 905U-K Wireless I/O is a small I/O transmitter that extends long-range, license-free communications to sensors in local, remote, or difficult-to-reach locations. Designed for low power consumption and easy plug-in of ELPRO BU-5 battery packs, the ELPRO 905U-K provides reliable continuity in environments typical of industrial applications with power constraints. Capable of transferring analog, pluse, or discrete inputs, and powering a loop-powered analog device (24 Vdc, 50 mA), the ELPRO 905U-K offers a simple-to-deploy and highly reliable solution. Features • 902-928 MHz frequency and up to 1W RF power • Link process inputs to single or multiple outputs (peer to peer) • Multiple power supply options, including battery-only supply with ultra-low power consumption (reverts to sleep mode) • Input-only transmitter unit (2 or 4 DI/PI, 1 AI) that can be connected to multiple I/O and/or gateway units, with up to 3000 units in a system • Peer-to-peer communications with exception reporting, reliable self-checking via update time. and secure data encryption • External inputs plus internally calculated values, including analog set point status, pulse rate and pulse total, power/battery supply voltage, and power supply alarm • Can connect to up/down counter transducers, such as shaft-encoders • Configurable repeat transmissions to enhance message reliability • Set point, pulse count, and rate available. Additional Internal I/O points provided for health monitoring • Class I Div 2 hazardous areas approval (US/Canada) Applications • High-level alarms • Security gate control • Emergency shower notification • Flow meter monitoring • Storage tank monitoring • Pipeline cathodic protection • Pump stop-start • Lighting bank control • Power reticulation relay fault notifications • Weather station reporting • Bearing condition monitoring

 Open the catalog to page 1
905U-K-2

Technical Data EL-905U-K Effective November 2018 SPECIFICATION DESCRIPTION Transmitter and Receiver Frequency 902-928 MHz © Transmission Frequency hopping spread spectrum (FHSS) Modulation Frequency shift keying Data rate 19.2 kbps with forward error correction Range (LoS) 20 miles (32 km) @ 4W © © EIRP 9.3 miles (15+km) @ 1W EIRP (other countries) Antenna connector Female SMA standard polarity Input and Output Digital inputs TTL voltage 0-1.5 Vdc (on), 3.5-13 Vdc (off) Surge protected, not isolated Voltage-free/NPN contacts 2 DI(external, status) Analog inputs 0-24 mA...

 Open the catalog to page 2
905U-K-3

ELPROTechnologies ELPRO Technologies 9/12 Billabong Street Stafford Queensland 4053 Australia ELPRO Technologies is a registered trademark. All other trademarks are property of their respective owners. [email protected] www.elpro.com.au © 2018 ELPRO Technologies All Rights Reserved Publication No. EL-905U-K November 2018

 Open the catalog to page 3

All ELPRO Technologies catalogs and technical brochures

  1. tlx400

    2  Pages

  2. TD032001EN

    4  Pages

  3. 215U-2

    4  Pages

  4. 245U-E-G1

    3  Pages

  5. 105U-G

    4  Pages

  6. 315-WH-DC

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.