1. Catalogs
  2. ELPRO Technologies
  3. 505U-K Wireless I/O

505U-K Wireless I/O
1 /3Pages

505U-K Wireless I/O

505U-K Wireless I/O
1 /3Pages

Catalog excerpts

505U-K Wireless I/O-1

505U-K Wireless I/O One‑way low‑power transmitter Description The ELPRO 505U-K Wireless I/O is a small I/O transmitter that extends long‑range, license-free communications to sensors in local, remote, or difficult‑to‑reach locations. Designed with low power consumption and simple plug-in of ELPRO BU-5 battery packs, the ELPRO 505U-K provides reliable continuity in environments typical of industrial applications with power constraints. Capable of transferring analog, pluse, or discrete inputs, and powering a loop-powered analog device (24 Vdc, 50 mA), the ELPRO 505U-K offers a simple‑to‑deploy and highly reliable solution. 869.525 MHz frequency and 500 mW RF power, or 869.875 MHz frequency and 5 mW RF power models Link process inputs to single or multiple outputs (peer to peer) Multiple power supply options, including battery-only supply with ultra-low power consumption (reverts to “sleep” mode) Input-only transmitter unit (2 or 4 DI/PI, 1 AI) that can be connected to multi‑I/O and/or gateway units, up to 3000 units in a system Peer-to-peer communications with exception reporting, reliable self-checking via update time, and secure data encryption External inputs plus internally calculated values, including analog set point status, pulse rate and pulse total, power/battery supply voltage, and power supply alarm Can connect to up/down counter transducers, such as shaft encoders Configurable repeat transmissions to five times for message reliability Set point, pulse count, and rate available. Additional internal I/O points provided for health monitoring Security gate control Emergency shower notification Flow meter monitoring Storage tank monitoring Pipeline cathodic protection Pump stop-start Lighting bank control Power reticulation relay fault notifications Weather station reporting

 Open the catalog to page 1
505U-K Wireless I/O-2

Specifications SPECIFICATION Transmitter and Receiver Frequency 868.525 MHz a 869.875 MHz b Transmit power 500 mW a 5 mW b Transmission Frequency modulation (FM) Modulation Digital frequency shift key (DFSK) Channel spacing 250 kHz Data rate 19.2 kbps with forward error correction Range (LoS) 6.2 miles (10 km) @ 500 mW a c EIRP 0.62 miles (1 km) @ 5 mW b c EIRP Antenna connector Female SMA standard polarity Internal gas discharger arrestor protection Input and Output Digital inputs TTL voltage 0–1.5 Vdc (on), 3.5–13 Vdc (off) Surge protected, not isolated, voltage-free/NPN contacts 2 DI (external,...

 Open the catalog to page 2
505U-K Wireless I/O-3

Technical Data EL-505U-K Effective November 2018 ELPRO Technologies 9/12 Billabong Street Stafford Queensland 4053 Australia Telephone: Global: +61 7 3352 8600 USA: +1 855 443 5776 [email protected] www.elpro.com.au © 2018 ELPRO Technologies All Rights Reserved Publication No. EL-505U-K November2018 ELPRO Technologies is a registered trademark. All other trademarks are property of their respective

 Open the catalog to page 3

All ELPRO Technologies catalogs and technical brochures

  1. tlx400

    2  Pages

  2. TD032001EN

    4  Pages

  3. 905U-K

    3  Pages

  4. 215U-2

    4  Pages

  5. 245U-E-G1

    3  Pages

  6. 105U-G

    4  Pages

  7. 315-WH-DC

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.