Catalogs >
ELPRO Technologies >
415U-2-C wireless I/O gateway

415U-2-C wireless I/O gateway
4Pages

Catalog excerpts

Condor series long-range high-speed industrial wireless I/O for reliable secure connectivity Description ELPRO’s industrial wireless solutions has 30 years of expertise in solving critical industrial applications through our extensive knowledge in wireless I/O, modem and gateway applications. The 415U-2-C extends communications to sensors in local, remote, and difficult-to-reach locations. Designed with the Condor series long-range, high data speed wireless transceiver and standards-based native Ethernet protocol over the air, gives 415U-2-C the power and flexibility to perform reliably in sprawling harsh industrial environments. Secure. AES encryption, advanced IP filtering, multilevel authentication, user access and change event logging features provide the user with the tools to ensure the highest level of data integrity and protection against malicious attacks. Flexible. Ethernet native support provides solutions to connectivity challenges today and in the future. The ELPRO 415U-2-C also provides Ethernet and serial gateway support for industrial protocols including ModbusT TCP/RTU and DNP3 I/O. Reliable. The Condor series 415U-2-C ProMesh™ operates reliably with the challenges of obstructed paths by using automatic path selection and frequency agility to allow the communications network to adapt to changes easily with redundancy. Features • Exceeding 140 kbps data throughput • Supports multiple data rates simultaneously for high performance over short and long communication links • Frequency agility roaming provides reliability and flexibility within the network architecture • Over-the-air context-based data compression and forward error correction provides maximum reliability and transmission efficiency • Redundancy modes for base, repeater, and remote • Wireless point-to-point or multipoint I/O and gateway functionality • Modbus TCP and RTU I/O gateway • DNP3 I/O gateway, including internal status registers • Standard Ethernet bridge default to allow modem function for external Ethernet host devices (full L2/ L3 network support) • 148-174 MHz, 340–520 MHz, 894-960MHz model options • 10 mW to 10 W RF power configurable, license or license-free • Software configurable wireless channel bandwidth supporting 6.25, 12.5, 25.0 kHz • Integrated digital, pulse, and analog I/O • Gather-scatter/block mapping and integrity checking transmissions for efficient event triggered peer-topeer I/O • Over-the-air network diagnostics and configuration • Secure data protection with WPA and AES256 encryption • Expandable I/O for local alarms and inputs/outputs • Full Ethernet protocol over the air provides a standards-based flexibility to support future and legacy devices • ProMesh automatic path selection and network formation • Renewables—solar farms, wind turbines, hydro • Internal Web dashboard for immediate view of local I/O • IO Plus Logic engine for controlling I/O points • User configurable dashboard to display I/O and Diagnostics • Water and wastewater: flows, levels, pumps • Irrigation: slew gate controls, levels • Oil and gas networks: gas well production, lift pump • Environmental: storm warning, smoke stacks, filters • Mining infrastr

Open the catalog to page 1

Technical Data EL-415U-2-C Effective September 2020 Specifications Specification Frequency a Transmit power—peak a Transmit power Modulation Receiver sensitivity 6.25/12.5/25 kHz Channel spacing Data rate raw no compression b Typical data throughput Typical range (LoS QPSK-FEC) Antenna connector System address Networking protocols Industrial protocols Configurable parameters User configuration Security IP filtering ESSID; 1 to 31-character text string TCP/IP, UDP, ARP, DHCP, DNS, ICMP, HTTP, VLAN 802.1Q, IPv6 pass through Gateway: Modbus RTU, Modbus TCP, DNP3 I/O Pass through: EtherNet/IP,...

Open the catalog to page 2

Technical Data EL-415U-2-C Effective September 2020 Accessories Description Ordering Product code 400 MHz dipole antenna, N-type female, 2 dBi gain 400 MHz collinear antenna, N-type female, 5 dBi gain 400 MHz collinear antenna, N-type female, 8 dBi gain 400 MHz Yagi antenna, N-type female, 6 dBi gain, includes bracket 400 MHz Yagi antenna, N-type female, 9 dBi gain, includes bracket 400 MHz Yagi antenna, N-type female, 12 dBi gain, includes bracket Product code Product code 415U-2 wireless I/O modem/ 214 - 240 MHz gateway including Class 1 Div 340–400 MHz 2 for hazardous area use 400 - 480...

Open the catalog to page 3

ELPRO Technologies 9/12 Billabong Street Stafford Queensland 4053 Australia ELPRO Technologies Inc 2028 East Ben White Blvd, #240-5665 Austin, TX 78741-6931 USA Telephone: Global: +61 7 3352 8600 sales@elpro.com.au www.elpro.com.au Telephone: USA: +1 855 443 5776 sales@elpro.com.au www.elpro.com.au © 2020 ELPRO Technologies All Rights Reserved Publication No. EL-415U-2-C September 2020 ELPRO Technologies is a registered trademark. All other trademarks are property of their respective owners.

Open the catalog to page 4