The PVX611 crimp pistol is the latest tool in the Elpress 600 series. The tool is 100% reverse compatible and has been tested and approved for use together with Elpress TB-dies and KB-dies. One new feature of the pistol is a display that gives you valuable information about your tool, e.g. number of performed crimps, battery status, service intervals, etc. The PVX611 has been created with a new ergonomic design that offers you, the user, enhanced performance. The tool is supplied with a 2-year guarantee*. There is also the possibility to set a “safety start”** on the tool. PVX611 crimps: - Cu-conductortype KRF/KSF 10-150 mm2, KRT10-240 mm2, KRD 10-185 mm2 - Al-conductors 16-25 mm2 - C-sleeves 6/6-50/50 mm2 * 2 -year guarantee if service/calibration is performed during the first year (or max. 10,000 cycles) at one ofElpress's authorised service stations. ** adjustable crimping operation start with optional one ortwo 'click'trigger for safer handling of the tool. TECHNICAL DATA: ■ Better protection against dirt and dust ingress through tool chassis ■ Ergonomic design that optimizes the balanace of the tool in the users hand ■ Press fork opened by rotary action ■ Crimp pressure control by electronic pressure monitoring ■ Single handed grip for easy operation ■ LED lighting for easier work ■ ’’Quick boost”for more efficient pressing ■ Digital display with information about the tool and service interval ■ Tested together with Elpress TB-dies and KB22/KB25-dies ■ Pressure monitoring information via display when at correct pressure /full pressure not achieved (warning light (LED) and signal) Elpress AB • P.O. Box 186, SE-872 24 KRAMFORS, Sweden Tel: +46 (0)612-71 71 00 | Fax: +(0)46 612-71 71 51 E-mail: [email protected] | www.elpress.ne