Catalogs >
Elmo Rietschle >
G-Series Side Channel

G-Series Side Channel
6Pages

Catalog excerpts

Side Channel

Side channel blowers Some technologies are so good that it is hard to improve them. Side channel blowers from Elmo Rietschle are such an example. They have proven their reliability in service for many decades, performing flawlessly day in and day out with virtually no down time. Noise levels have been lower than that of most other v acuum pumps and compressors. Our side channel blowers are available in a wide selection for performance ranges up to 3,000 m³/h and differential pressures of up to 1,000 mbar. They cover the most varied requirements flexibly and powerfully. The G-Series side...

Open the catalog to page 2

The smallest side channel blower on the market With a height and width of approx. 125 mm and a depth of approx. 60 mm, the G-BH100 blowers are the smallest side channel blowers available on the market. Unsurpassed at highest differential pressure Our G-BH7 side channel blowers can create pressure differences of up to 1,000 mbar – more than any other gas ring compressor! So far, the systems used to reach these differential pressure ranges were much louder and larger – or subject to wear. Now the advantages of wear free operation coupled with a low noise level can also be used in the most...

Open the catalog to page 3

Operating principle The impellors in the G-Series machines are mounted directly on the motor shaft for contact free compression. Maximum operational reliability, even at high differential pressures, is ensured by the arrangement of the bearings outside the compression chamber. The gas is taken in through the inlet (1). As it enters the side channel (2), the rotating impellor (3) imparts velocity to the gas in the direction of rotation. Centrifugal force in the impellor blades accelerates the gas outward and the pressure increases. Every rotation adds kinetic energy, resulting in further...

Open the catalog to page 4

Applications Central vacuum systems Degasification of food Dental vacuum Drying out buildings Filling bags / bottles / silos Fishpond ventilation Gas analysis Feeding fish using pellet conveying Laser printers Pneumatic conveying Vacuum & Pressure Industrial vacuum cleaners • Conveying granulated material and powdery media Letter sorting / enveloping Lifting and holding parts using vacuum suction Packaging industry • Assembling and folding packaging materials • Vacuum packaging Plastics industry • • • • • • Contact free plastic film redirection Cooling and drying extruder products EPS...

Open the catalog to page 5

www.gd-elmorietschle.com www.gd-industrials.com er.de@gardnerdenver.com Gardner Denver Schopfheim GmbH Roggenbachstrasse 58 79650 Schopfheim · Germany Phone +49 7622 392-0 Fax +49 7622 392-300 F-Series Radial G-Series Side Channel Gardner Denver Deutschland GmbH Industriestrasse 26 97616 Bad Neustadt · Germany Phone +49 9771 6888-0 Fax +49 9771 6888-4000 L-Series Liquid Ring V-Series Rotary Vane R-Series Rotary Lobe C-Series Claw S-Series Screw X-Series Systems Order No.: GDJ:B-SB101-A1-76, Printed in Germany, ER 0005/1187, 2.0/12-2015, ©2015 All Rights Reserved, HENNIG · Nbg · Subject to...

Open the catalog to page 6

G-Series Side Channel 6Pages

Catalog excerpts

All Elmo Rietschle catalogs and technical brochures

G-Series Side Channel
6Pages