Catalogs >
Elmo Rietschle >
C-Series Claw

C-Series Claw
6Pages

Catalog excerpts

C-Series Claw

Claw vacuum pumps, compressors and pressure-vacuum pumps Our dry running C-Series generates contact free vacuum or compressed air efficiently and economically due to the principle of internal compression. This leads to considerable energy savings compared to the traditional rotary lobe design without internal compression. C-VLR ZEPHYR Vacuum pump Wide spectrum of performance With the C-VLR claw vacuum pumps and C-DLR claw compressors the following ultimate pressures are attainable during continuous operation: vacuum up to 50 mbar (abs.) and pressure up to 2.2 bar. Combination...

Open the catalog to page 2

Product overview C-VLR ZEPHYR C-KLR ZEPHYR Claw vacuum pumps Capacities ranging from 60 to 1,000 m³/h and maximum continuous vacuum up to 50 mbar (abs.). Highly efficient, dry and contact free. Steady performance curve over the entire operating range. Integrated air cooling without additional cooling medium. Available with optional variable speed drive. ATEX compliant versions available upon request. Low maintenance; wide range of applications. Claw combination pressure-vacuum pumps Capacities ranging from 80 to 140 m³/h. Vacuum up to - 0.6 bar and pressure up to + 1,0 bar. Highly...

Open the catalog to page 3

Technical specifications Vacuum range in mbar (abs.) Operating principle Much like rotary vane and rotary lobe pumps, the claw compressors and vacuum pumps of the C-Series are based on a static compression system. In contrast to rotary lobes, compression happens internally by volume contraction. As the rotors revolve, the gas moves from the suction side to the pressure side. Then it is compressed by the reduction of the volume between the rotors until the lower rotor uncovers the discharge channel (5). This “internal compression” leads to high differential pressures at efficiencies of more...

Open the catalog to page 4

Applications Central vacuum systems Chemical industry • Gas compression Environmental engineering • Aeration • Drying • Dust extraction • Gas compression • Soil remediation Medical industry Packaging industry Pneumatic conveying Post-Press applications • Air supply cabinets • Book-binding machines • Collating machines • Cutting machines • Folding machines Printing industry • Air supply cabinets • Central customized systems • Drying machines • Ionization • Rotary offset machines • Sheet offset machines Woodworking industry • Clamping • Dust extraction • Holding Vacuum & Pressure Industrial...

Open the catalog to page 5

www.gd-elmorietschle.com www.gd-industrials.com er.de@gardnerdenver.com Gardner Denver Schopfheim GmbH Roggenbachstrasse 58 79650 Schopfheim · Germany Phone +49 7622 392-0 Fax +49 7622 392-300 F-Series Radial G-Series Side Channel Gardner Denver Deutschland GmbH Industriestrasse 26 97616 Bad Neustadt · Germany Phone +49 9771 6888-0 Fax +49 9771 6888-4000 L-Series Liquid Ring V-Series Rotary Vane R-Series Rotary Lobe C-Series Claw S-Series Screw X-Series Systems Order No.: GDJ:B-SB107-A1-76, Printed in Germany, ER 0005/1188, 2.0/01-2016, ©2016 All Rights Reserved, HENNIG · Nbg · Subject to...

Open the catalog to page 6

C-Series Claw 6Pages

Catalog excerpts

All Elmo Rietschle catalogs and technical brochures

C-Series Claw
6Pages