*mydirectindustry

BH1 590

Product catalog summary

Technical Specifications:
The document provides technical specifications for the G-BH1 side channel blower, which can function as both a vacuum pump and a compressor. The performance curves are based on air at 15°C and atmospheric pressure of 1013 mbar, with a tolerance of ±10%. The equipment is suitable for continuous operation across the entire performance curve range.

Motor and Electrical Details:
The motors are available in protection category IP 55 and insulation class F, compliant with EN 60 034-1 / -2 / -30 (IEC 60034) and thermal class F. They are UL and CSA approved. The document specifies voltage ranges for different frequencies (50 Hz and 60 Hz) and notes that the motors can handle converter input voltages up to 460 V.

Performance and Operation:
The document includes performance curves for different operational conditions, indicating suction capacity, power consumption, and temperature rise. Relief valves are available to limit differential pressure. The sound pressure level is measured according to EN ISO 3744, with a tolerance of ±3 dB(A).

Compliance and Standards:
All G-BH pumps comply with the 2006/42/EC (machinery) and 2006/95/EC (low voltage) directives and the EN 60034-1 norm for rotating electrical machines.

Additional Information:
Changes to performance curves, data, and weights may occur without prior notice. The document provides contact information for Gardner Denver Deutschland GmbH and Gardner Denver Schopfheim GmbH.

Catalog excerpts

G-BH1 Data sheet 2BH1 590 Side channel blower Performance curves Vacuum operation Compressor operation Total pressure difference ∆p [mbar] Power consumption P at pump shaft [kW] Total pressure difference ∆p [mbar] Temperature rise ∆T of conveyed air [K] Gardner Denver Deutschland GmbH Total pressure difference ∆p [mbar] The performance curves are based on air at a temperature of 15 ° and an C atmospheric pressure of 1013 mbar with a tolerance of ± 10 %. The total pressure differences are valid for suction and ambient temperature up to 25 ° For other conditions please get in touch wit h us. C. Every G-BH pump can be used both as vacuum pump and compressor in continuous operation over the total performance curve range. The motors are available as standard in protection category IP 55 and insulation class F. The vacuum pumps / compressors are UL and CSA approved. Technical data sheet - Edi

Open the catalog to page 1

Selection and ordering data Type 2BH1 590 No. Frequency Rated Voltage Max. differential 2) pressure Vacuum Pressure mbar Sound pressure 3) level dB(A) Weight Approx. 3~ 50/60 Hz, IP55, Insulation material class F, UL 507 and CSA 22.2 No 113 (certificate number E225239) 2 1~ 50 Hz, IP55, Insulation material class F, with attached capacitor for cont. operation 1 In case of frequency converter operation the standard motor insulation system is suitable for converter input voltages up to 460 V. Relief valves available for limiting differential pressure. Measuring surface sound pressure level acc....

Open the catalog to page 2