1. Catalogs
  2. ELMITI
  3. RISCALDATORI ELETTRICI
video corpo

RISCALDATORI ELETTRICI

RISCALDATORI ELETTRICI
1 / 37 PagesView full catalog

RISCALDATORI ELETTRICI

Product catalog summary
Introduction: This document provides comprehensive specifications and guidelines for immersion heaters used in heating liquids like water and oil. It highlights the importance of selecting appropriate materials to prevent corrosion, which affects the durability of heating elements.
Specifications: The heaters are divided into series based on power output and application. The GA5TR and GA6T series are for water heating with a power output of 7W/cm², while the GO5TR and GO6T series are for oil heating with 2W/cm², ensuring suitable heating for each application.
Materials: Materials such as AISI 321 stainless steel, Incoloy 800, and AISI 316L are used for their corrosion resistance. AISI 321 is suitable for non-aggressive food liquids, and Incoloy 800 is ideal for high-temperature, corrosive environments.
Corrosion Considerations: The document discusses corrosion types and emphasizes selecting the right material to mitigate corrosion effects. It notes that closed systems with minimal oxygen exposure reduce corrosion risk.
Product Codes and Options: A detailed list of product codes specifies power, length, and optional features like watertight enclosures. Customers should specify additional features when ordering to meet specific requirements.
Conclusion: Understanding the liquid composition is crucial, and consulting technical experts is recommended if there are doubts about heater suitability for specific applications.
SCIOGLIPAR Satellite Dish Heaters: These heaters prevent snow and frost on satellite dishes, ensuring signal reception. The kit includes aluminium sheets with heating circuits, suitable for 60 cm and 80 cm dishes, installed using weather-resistant adhesive.
SCIOGLIPANN Photovoltaic Panel Heaters: These heaters melt snow and ice on photovoltaic panels, featuring an aluminium adhesive film with IP67 connectors for series connection. Installation involves cleaning the panel, applying the film, and connecting to the mains. Activation above 10°C is not recommended.
Thermostats and Temperature Regulators: Available thermostats include single-pole (TU 20A - 240 V) and three-pole (TC 16A - 400 V) models with automatic reset. A configurable temperature regulator is suitable for industrial applications.
Cables and Sheaths: High-temperature cables operate between -60°C and +320°C, with nickel conductors and P.T.F.E. insulation. Medium-temperature cables operate between -60°C and +180°C, with copper conductors and silicone rubber insulation. High-temperature sheaths and resistive wires made of Nickel/Chrome are also available.
See more

Catalog excerpts

RISCALDATORI ELETTRICI-2

Heaters on PLUG 1 Element Ø8 mm Heaters on PLUG 1 Element Ø10 mm Heaters on PLUG 3 Elements Ø8 mm Heaters on PLUG 3 Elements Ø16 mm REDAR FINNED heating elements LOVAR FINNED heating elements FLEXIBLE SILICONE heating elements STAINLESS STEEL DRUM HEATER heating elements INFRARED CERAMIC HEATING ELEMENTS CARTRIDGE HEATING ELEMENT SNOW MELTING HEATING ELEMENTS FOR SATELLITE DISHES CABLES – SHEATHS RESISTIVE WIRES SNOW MELTERS FOR PHOTOVOLTAIC PANELS Heaters on PLUG 3 Elements Ø10 mm WINE heaters NOZZLE HEATING ELEMENTS TEMPERATURE REGULA

 Open the catalog to page 2
RISCALDATORI ELETTRICI-3

Heaters on brass 1" U gas plug 1 U-shaped Element 08 mm M3 terminals: Carbon steel Nuts and washers: brass GA4MX: Tube: INCOLOY 800 Wire: Nickel Chrome 80/20 Oxide: High temperature GO4M: Tube: AISI 321 Wire: Nickel Chrome 60/40 Oxide: Medium temperature GA4MX series: Heaters sized for operation in water with a specific power output of 9W/cm; the heaters in this series are characterised by a high output combined with very compact dimensions, while maintaining high reliability, thanks to the high quality materials used in their construction.GO4M series: Low specific power heaters, 2 W/cm2 specifically...

 Open the catalog to page 3
RISCALDATORI ELETTRICI-4

Heaters on brass 1" N gas plug 1 EYELET Element 08 mm M3 terminals: Carbon steel Nuts and washers: brass GA4MRX: Tube: INCOLOY 800 Wire: Nickel Chrome 80/20 Oxide: High temperature GO4MR: Tube: AISI 321 Wire: Nickel Chrome 60/40 Oxide: Medium temperature <£ GA4MRX series: Heaters sized for operation in water with a specific power output of 9W/cm; the heaters in this series are characterised by a high output combined with very compact dimensions, while maintaining high reliability, thanks to the high quality materials used in their construction. GO4MR series: Low specific power heaters, 2 W/cm2...

 Open the catalog to page 4
RISCALDATORI ELETTRICI-5

Heaters on brass 1" V gas plug 1 U-shaped Element 010 mm Tube: AISI 321 Wire: Nickel Chrome 60/40 Oxide: medium temperature Terminals: Carbon steel Nuts and washers: brass GA5M series: Heaters sized for operation in water with a specific power output of 7W/cm; the main features of this series are good output and excellent reliability. GO5M series: Low specific power heaters, 2 W/cm2 specifically sized for operation in oil. Guarantee heating suitable for this type of application thanks to their low load. In the normal version, the heater is intended with an IP40 electrical enclosure. When ordering,...

 Open the catalog to page 5
RISCALDATORI ELETTRICI-6

Heaters on brass 1" V2 gas plug 1 EYELET Element Tube: 010 mm AISI 321 Wire: Nickel Chrome 60/40 Oxide: medium temperature Terminals: Carbon steel Nuts and washers: brass GO5MR series: Low specific power heaters, 2 W/cm2 specifically sized for operation in oil. Guarantee heating suitable for this type of application thanks to their low load. In the normal version, the heater is intended with an IP40 electrical enclosure. When ordering, please specify any optional features in addition to the heater code: v'J Watertight enclosure: IP55 Bulb thermostat automatic reset 1 contact: T1 Scale 4-40°C...

 Open the catalog to page 6
RISCALDATORI ELETTRICI-7

Riscaldatori tippo l"l/4 @as Heaters on brass 1" U gas plug 3 U-shaped Elements 08 mm M3 terminals: Carbon steel Nuts and washers: brass GA4TX: Tube: INCOLOY 800 Wire: Nickel Chrome 80/20 Oxide: High temperature GO4T: Tube: AISI 321 Wire: Nickel Chrome 60/40 Oxide: Medium temperature GA4TX series: Heaters sized for operation in water with a specific power output of 9W/cm; the heaters in this series are characterised by a high output combined with very compact dimensions, while maintaining high reliability, thanks to the high quality materials used in their construction. GO4T series: Low specific...

 Open the catalog to page 7
RISCALDATORI ELETTRICI-8

Heaters on brass 2" gas plug 3 EYELET Elements 08 mm M3 terminals: Carbon steel Nuts and washers: brass GA4TRX: Tube: INCOLOY 800 Wire: Nickel Chrome 80/20 Oxide: High temperature GO4TR: Tube: AISI 321 Wire: Nickel Chrome 60/40 Oxide: Medium temperature GA4TRX series: Heaters sized for operation in water with a specific power output of 9W/cm; the heaters in this series are characterised by a high output combined with very compact dimensions, while maintaining high reliability, thanks to the high quality materials used in their construction. GO4TR series: Low specific power heaters, 2 W/cm2 specifically...

 Open the catalog to page 8
RISCALDATORI ELETTRICI-9

GA5T series: Heaters sized for operation in water with a specific power output of 7W/cm; the main features of this series are good output and excellent reliability. GO5T series: Low specific power heaters, 2 W/cm2 specifically sized for operation in oil. Guarantee heating suitable for this type of application thanks to their low load. In the normal version, the heater is intended with an IP40 electrical enclosure. When ordering, please specify any optional features in addition to the heater code: Watertight enclosure: IP55 Bulb thermostat automatic reset 1 contact: T1 Scale 4-40°C ; T2 Scale...

 Open the catalog to page 9
RISCALDATORI ELETTRICI-10

Heaters on brass 2" % gas plug 3 U-shaped Elements Tube 010 mm.: AISI 321 Wire: Nickel Chrome 60/40 Oxide: medium temperature Terminals: Carbon steel Nuts and washers: brass GA5TR series: Heaters sized for operation in water with a specific power output of 7W/cm; the main features of this series are good output and excellent reliability. GO5TR series: Low specific power heaters, 2 W/cm2 specifically sized for operation in oil. Guarantee heating suitable for this type of application thanks to their low load. In the normal version, the heater is intended with an IP40 electrical enclosure. When...

 Open the catalog to page 10
RISCALDATORI ELETTRICI-11

V3/=\©I Iiit§l4tt©#! su t§@#@ 1“ M in Heaters on brass 2" Vz gas plug 3 U-shaped Elements Terminals: M6 in Carbon steel Nuts and washers: brass GO6T Tube 016 mm.: Fe 360 Wire: Nickel Chrome 60/40 Oxide: medium temperature GA6T Tube 016 mm.: AISI 321 Wire: Nickel Chrome 60/40 Oxide: medium temperature GA6T series: Heaters sized for operation in water with a specific power output of 7W/cm; the main features of this series are discrete output and high reliability and robustness. GO6T series: Low specific power heaters, 2 W/cm2 specifically sized for operation in oil. Guarantee heating suitable for...

 Open the catalog to page 11
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.