Melamine range of terminals

Product catalog summary

Technical Data Summary

Dimensions and Measurements

The document lists various dimensions primarily in millimeters and inches, such as 49 x 40 mm (1.92 x 1.57 inches) and 42 x 46 mm (1.65 x 1.81 inches). These likely correspond to component sizes or mounting dimensions.

Terminal Types (Polyamide 6.6)

A comprehensive list of terminal types made from Polyamide 6.6 is provided. These include models such as KUTM 2.5, KUT 4, KST 4 U WS, KUT 6, KUT 10, ET 6, ET 10, KAT M3, KAT M4, KAT M5, KBT M4, KBT M5/M5-15, KBT M6, and their variants with suffixes like C, CC1, CC2, CA1, CA2, D1, R, MOV, and others.

Additional terminal types include DBK series (DBK 8, DBK 1x2, DBK 1x4, DBK 1x8), FDBK series (FDBK 3, FDBK 8, FDBK 1x2, FDBK 1x8), DFBK 12, UBT series (UBT 2.5N, UBT 2.5, UBT 4, UBT 6, UBT 10), EBT series (EBT 2.5, EBT 4, EBT 6), and others such as OAT 2.5, OAT 6, OAT 6T, KUF series, KLTD M4, KUTSD 6, KUTD 10, KULTD 6, KULTD 4, KULTD 4WS, KBT 100, UBT 4 TWIN, UBDD 4, SUT series, CET 4, NET 4, MBT 4, PET 4, DCT and DST series, SCT series, MCT series, among others.

Plates and Accessories

The document also enumerates various plates and accessory components, including KPNS, KP X, KSP 6WS, KP Y, KP T, EPDD, KPDD, DP3D, DPSD, KPSL, KPXN, KPDDN, KPS4, OEP series (OEP 2.5, OEP 6, OEP 6T), EPF, EPFH, KPLD4, KPSD, KPTD, KPSLD, KPSD4, KPX 100, UP X, UPNS, UP TWIN, UPDD, ES series (ES 2, ES 4), EPMN, MP1, EPP, DEP series (DEP 2.5, DEP 4), DSEP series (DSEP 2.5, DSEP 4, DSEP 6, DSEP 10), SEP series (SEP 2.5, SEP 4), DMP 2.5, DFEP, DCEP, MEP 2.5, MEP 4.

Key Observations

The document appears to be a catalog or specification sheet listing terminal blocks, plates, and related components with their types and dimensions.
Material specification for terminals is Polyamide 6.6, indicating durability and electrical insulation properties.
Dimensions are consistently provided in both metric and imperial units for clarity.
The extensive list of terminal types and plates suggests a broad product range for electrical or electronic assembly applications.

Catalog excerpts

STUD TYPE TERMINAIS eimex "C" Sries (TS32mm) DIN Rail Mounted Stud Type Terminais in Melamine Housing are specifically developed for termination using Ring/Fork Type Lugs and provide a very reliable connection against vibration. They are available in two types : 1 ) Screw driver operated 2) Nut driver operated The range covers terminais for conductor sizes from 0.5 sq mm to 35 sq mm. AH the mtal parts used are of brass (copper alloy) which make them suitable for use in applications like switch boards, switch yards, marshalling racks etc., generally exposed to environmental extremities. Transparent...

Open the catalog to page 6

TEST/DISCONNECT TERMINAIS Certain applications in contrai and measurement circuits necessitate locating operating faults quickly without disconnecting the condudors. e/mex affers a range of Disconnecting Type Terminal Blocks which can be used to disconnect the continuity without actually removing the wires. Thse Terminal Blocks mainlyfind applications in secondary Circuit of CI, Relay Panels etc. Aclearly visible Sliding Link is used for disconnection. The link can be moved to one side by unscrewing. The tightening of the screw prevents it from sliding back. The 4 mm diameter nut assembly can...

Open the catalog to page 8

ACCESSORIES - end plates/barrier plates e/mex End Plates are mainly used to cover the last Terminal Block to insulate the live mtal components. They are available for ail types of Terminal Blocks in standard and non standard colours. e/mex Barrire Plates are used to isolate adjacent terminais electrically, so as to maintain the required creepage and clearance values. Apart from this fonction they are also used for identification and s騩grgation of terminal groups. terminal type (polyamide 6.6) end plates terminal type (polyamide 6.6) KBT 100 UBT 4,UBT 6,UBT 10 UBT 2.5 UBT 4 TWIN UBDD 4 SUT 1.5...

Open the catalog to page 9

"||S|_ POWER TERMINAIS DESCRIPTION TERMINAL PITCH HEIGHTxWIDTH in mm (inch) RATED CROSS SECTION CONNECTION POSSIBILITY WIRE STRIPPING LENGTH CBT 100 26 mm (1.02 inch) 43x52(1.69x1.97) 35 sq mm 6 sq mm - 35 sq mm CBT 110 28 mm (1.10 inch) 51.5x75(2.03x2.95) 50 sq mm 35 sq mm - 50 sq mm CBT 170 32 mm (1.26 inch) 52x85(2.05x3.35) 70 sq mm 50 sq mm - 70 sq mm CBT 250 40 mm (1.57 inch) 52x96(2.05x3.78) 95 sq mm 70 sq mm - 95 sq mm TYPE OF CONNECTRATINGS SCREWSIZE 2 nul flat connection for ring/fork lugs 2 nuts flat connection for ring lugs 2 nuts flat connection for ring lugs 2 nuts flat connection...

Open the catalog to page 10

All Elmex Controls Pvt. Ltd. catalogs and technical brochures

Polyamide range of terminals
48 Pages