oven for hotforming
oven for hotforming
Product catalog summary
1. Complete Line for Vulcanizing and Forming Rubber Hoses:- Equipment Description: Rubber hoses are placed on trays in their final configuration.
- Conveyance System: Eleven motorized chain conveyors transport trays through the oven.
- Transfer Mechanism: Two rotating tables facilitate transfers between conveyors.
- Cooling System: Two cooling tunnels equipped with four exhaust blowers.
- Heating Tunnel: Three-zone heating tunnel with a maximum temperature of 480°F, maintaining uniformity of +/- 10°F, supported by three recirculation blowers and three gas burners.
- Dimensions: 67’ x 32’ x 11.5’.
2. Varnish Curing Oven for Rubber Profiles:- Equipment Description: Rubber profiles pass through the oven at speeds of 50 to 75 ft/min.
- Curing Method: Varnish is cured using Infrared modules.
- Temperature Profile: Product temperature starts at 100°F and reaches 375°F at the exit.
- Oven Coverage: Entirely covered by hoods activated by air cylinders.
- Exhaust System: Comprises ducts and two blowers for VOC evacuation.
- Length: 46’.
3. Vulcanization Oven for Rubber Profiles:- Equipment Description: Vulcanization is achieved through hot air convection, gas heated.
- Conveyor System: One motorized conveyor operates at 75 ft/min.
- Temperature Capacity: Maximum operating temperature of 480°F.
- Oven Coverage: Fully covered by hoods activated by air cylinders for loading and maintenance.
- Air Circulation: Includes one recirculation blower and one exhaust blower.
- Length: 56’.
See more
All ELMETHERM catalogs and technical brochures
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.