In-plant Holiday Detector System ISOTEST® act P2

Product catalog summary

Overview: The ISOTEST act P2 is a device designed for reliable porosity testing of FBE and PE/PP coatings on pipes. It integrates both control unit and high voltage generator in a compact housing, allowing for continuous operation and testing of non or slightly conductive materials.

Specifications:

Test Voltage: Ranges from 2.5 kV to 25.0 kV, with alternative combinations available upon request.
Test Channels: Supports up to 6 channels in master/slave mode.
Voltage Supply: Operates on 100 – 240 VAC or 90 – 375 VDC.
Power Supply: Less than 100 W, load-dependent.
Testing Speed: Up to 1200 mm/s.
Operating Time: Suitable for continuous operation across three shifts.
Environmental Conditions: Operates in temperatures from 0° C to +50° C, with a maximum relative humidity of 60% at 30° C.
Dimensions and Weight: Measures 380 x 210 x 300 mm and weighs 12 kg.

Features:

Impulse technology eliminates electrostatic charges, enhancing safety.
Phantom-Grounding allows testing without direct grounding.
Load-dependent regulation ensures stable test voltage under demanding conditions.
Optimized pulse repetition frequency enables high testing speeds.
Integral evaluation process detects and displays even the smallest defects with minimal material stress.

Compliance and Safety: The device complies with DIN EN/ISO/DVGW standards and carries the CE label, ensuring it meets safety and EMC requirements.

Application: Suitable for testing FBE and 3-layer PE/PP pipe coatings for holidays or damage, ensuring reliability and safety in various conditions.

Catalog excerpts

In-plant Holiday Detector System ISOTEST® act P2-1

R E LIAB LE POROS IT Y TE STING OF PIPE C OATINGS ISOTEST act P2 … Porosity testing of FBE and PE / PP coatings with a single device QQ Testing according to DIN 30670 QQ Testing of dirty, damp and even slightly conductive pipe coatings QQ Up to 6 test channels - synchronisation of several devices (master / slave mode) QQ “Phantom-Grounding“ – no direct grounding necessary QQ External switch-on / switch-off of the test voltage QQ Adjustable sensitivity and filter func

Open the catalog to page 1

In-plant Holiday Detector System ISOTEST® act P2-2

FBE and 3 layer PE / PP pipe coatings can reliably be tested for holidays or other damage. Q a compact “all-in-one” device (control unit and high voltage generator in a single compact housing) Q continuous operation (three shifts) Q porosity / leak testing of all non or slightly conductive materials Q external switch-on / switch-off of the test voltage Q increased operator safety – thanks to the combination of impulse voltage and smart power control Q stable test voltage, even under demanding conditions, guaranteed by load-dependent regulation of energy Q high testing speeds made possible by...

Open the catalog to page 2

All ELMED Dr. Ing. Mense GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list