MARK REFRIGERATION DRYER

Product catalog summary

Product Overview: The MARK Refrigeration Dryer MDX 4100 is designed for use in compressed air systems to ensure clean and dry air. It features an automatic condensate trap and uses environmentally friendly refrigerant gases. The dryer is priced at €2,140.00 excluding tax and €2,568.00 including tax, excluding shipping costs.

Technical Specifications: The dryer has an effective delivery amount of 4,100 l/min and operates at a maximum pressure of 13 bar. It is oil-free and requires an electrical connection of 230/50 V/Hz. The dimensions are 460 mm in length, 560 mm in width, and 790 mm in height, with a weight of 60 kg.

Drying Principle: The MDX 4100 operates using a series of components including a refrigerant compressor, capacitor, motor-driven fan, air/refrigerant evaporator, and condensation separator with a dehumidifier filter. It also includes a dew point thermometer and automatic drainage of condensation.

Product Highlights: The dryer protects compressed air systems from corrosion, rust, and leaks, thereby enhancing the quality of the final product and increasing overall productivity. It also extends the service life of downstream equipment and tools.

Typical Applications: The MDX 4100 is typically used with a compressor with aftercooler, prefilter "G" or cyclone separator "WS", fine filter "C", and active carbon filter "V".

Catalog excerpts

MARK REFRIGERATION DRYER MDX 4100, with automatic condensate trap Article Number: 11517 EAN Code: 9004853115172 €2,140.00 Excl. Tax €2,568.00 Incl. Tax excl. Shipping Cost TECHNICAL FACTS Clean and dry air: Compressed air is cooled by a refrigerant gas, whereby the water in the air condenses so that it can be removed. Protects the compressed air system against corrosion, rust and leaks. Higher quality of the final product. Increase in overall productivity. Protection for downstream equipment. Environmentally friendly refrigerant gases PRODUCT HIGHLIGHTS MDX - FOR DRY COMPRESSED AIR A compressor absorbs moisture and certain impurities from the intake air. During the compression process, these particles combine with the oil in the compressor. All of these contaminants can cause wear and corrosion in downstream equipment, leading to costly production interruptions, and can therefore reduce equipment efficiency and service life. WELDING TECHNOLOGY STONE CUTTING TECHNOLOGY POWER GENERATOR

Open the catalog to page 1

MARK REFRIGERATION DRYER To avoid these negative effects, dryers have been developed that ensure air quality, increase efficiency and productivity, and extend the service life of your equipment and tools. DRYING PRINCIPLE 1. Refrigerant compressor 2. Capacitor 3. Motor-driven fan 4. Air/refrigerant evaporator 5. Condensation separator with dehumidifier filter 6. Air/air heat exchanger 7. Refrigerant separator 8. Maximum pressure switch 9. Operating valve 10. Minimum pressure switch 11. Fan pressure switch 12. Hot gas bypass valve 13. Refrigerant filter 14. Capillary tubes 15. Operating valve...

Open the catalog to page 2