Brochure Elmasteam 8 basic - Industry
4Pages

■ made ■ in ■ germany Industry Elmasteam 8 basic Powerful steam jet cleaning technology for industrial applications ■ Cleaning, rinsing and drying - all with one device ■ Long steam availability with 8 bar steam pressure ■ Individually adjustable pressure ranges "soft" and "strong" ■ Automatic "Eco-mode" saves costs and energy and is environmentally friendly ■ Integrated intelligent decalcification programme ■ 3 years warranty*

Elmasteam 8 basic The environmentally friendly cleaning, rinsing and drying alternative Large quantities of oil, lubricants, polishing pastes and swarf occur frequently in industry and in workshops due to the processing with machinery. In order to clean the workpieces effectively, pre-cleaning with Elmasteam 8 basic is recommended. With the selectable pressure modes „soft“ und „strong“, the individual regulation of moisture in the steam (wet or dry steam) and the strong heating power, the Elmasteam 8 basic is ready for even challenging cleaning tasks. The individually adjustable Eco-mode...

Elmasteam 8 basic Quality and safety with thought-out steam cleaning technology QUALITY and SAFETY are top priorities at Elma. This means, life of the heating. The decalcification programme can be easily only tried and tested components and high quality materials are started in Service-mode. Occuring sediments can be rinsed out used. For more user safety, Elmasteam 8 basic has an integrated, following the operating instructions and using the rinsing set. automatic Lock-mode. To reduce maintenance efforts and to extend service inWater can be filled via the integrated funnel in the tank or...

The Elma Cleaning Concept In the pre-cleaning stage much of the contamination is already removed or solubilized if Elmasteam 8 basic steam cleaning units are used ( 1 ). Pre-cleaned parts carry less dirt into the ultrasonic bath. Thus the cleaning cycles will be shorter and the cleaning bath can be used for a longer time ( 2 ). Rinsing with Elmasteam 8 basic and pure water removes remaining particles and residues of the ultrasonic bath ( 3 ). Efficient drying of the parts with Elmasteam or the Elma hot-air-dryer ( 4 ) is the last step of professional parts cleaning. Pre-cleaning with...