Catalogs >
Elma Electronic AG >
Magic- / Spiritkit 11_Datasheet_E

Magic- / Spiritkit 11_Datasheet_E
8Pages

Catalog excerpts

CHASSIS AND SUBRACKS MAGIC-KIT 11 | SPIRIT-KIT 11 Product description MAIN FEATURES Magic- and Spirit-Kit 11 are EMC shielded subracks for IEC or IEEE applications. Both subracks impress with their simple and cost-effective structure with excellent EMC capability. Sheet steel side walls ensure extremely fast assembly and EMC protection without seals. Advanced EMC shielding without gaskets (standard) Internal adaption parts freely accessible Quick assembly Sheet steel, pre-galvanised Vibration-proof Dimensions and adaptations according to IEC 60297 Suitable for IEC 60297 (Magic-Kit 11) or IEEE 1101.10 (Spirit-Kit 11) PRODUCT VARIETY › › › › Magic-Kit 11 according to IEC 60297 Spirit-Kit 11 according to IEEE 1101.10 Numerous accessories Vertical and horizontal card mounting Several depths 3 or 6 U Individual interior design Electronics in a protected EMC environment Application in invisible areas (cabinet installation) Cost sensit

Open the catalog to page 1

ELMA Your Solution Partner 240 mm | 9.44" ■ 300 mm | 11.81" ■ 390 mm | 15.35'' EXECUTIONS MAGIC-KIT 11 Front extrusions according to IEC 60297 specifications SPIRIT-KIT 11 Front extrusions according to IEEE 1101.10 and CompactPCI specifications, designed for plug-in units with high forces ASSEMBLY INSTRUCTIONS QUICK ASSEMBLY 1. Open the package and lay out the parts. 3. Insert top and bottom cover, tighten four screws. 2. Screw together the two side panels, four extrusions and four tapped strips - and the frame is ready. 4. The EMC subrack is fully assembled without additional gaskets.

Open the catalog to page 2

ELMA Your Solution Partner EMC PROTECTION Electromagnetic comptability is the ability of a system to operate in the intended environment without causing or suffering unacceptable degradation of performance due to unintentinal electromagnetic radiation or response. The EMC character-stics of a system therefore consist of an appropriate immunity from interference (noise immunity) and a limited emission of interference (noise emission). Elma's EMC concept describes three levels of electromagnetic shielding performance (performance level). The attenuation levels will simplify the selection of...

Open the catalog to page 3

ELMA Your Solution Partner BASIC CASE ■ EMC level: Advanced (standard) ■ Top and bottom covers fully perforated ■ Aluminium extrusions, electrically conductive ■ Side plates, top and bottom covers of pre-galvanised sheet steel Scope of delivery: ■ 2 side panels ■ 2 front extrusions ■ 2 internal extrusions ■ 4 tapped strips (6 pieces for 6 U) ■ 2 insulating strips (for backplane, insulated mounting only); ■ 4 pieces for 6 U ■ 2 top / bottom covers, perforated ■ Assembly material ■ EMC gasket for front / side ■ 1 double extrusion (6 U only) Rear panel has to be ordered separately

Open the catalog to page 4

ELMA Your Solution Partner

Open the catalog to page 5

ELMA Your Solution Partner ADAPTION KIT FOR RECESSED CARD INSTALLATION Range of application: ■ Recessed mounting of single / double eurocards depth 160 to 220 mm ■ Without individual front panels Scope of delivery: ■ 2 internal extrusions ■ 2 tapped strips ■ 1 set assembly materiall EDGE CONNECTOR EXTRUSION 66-147 ■ For use with extrusions for backplanes 66-193 Scope of delivery: ■ 1 aluminium extrusion, clear passivated (conductive)

Open the catalog to page 6

CHASSIS AND SUBRACKS MAGIC-KIT 11 | SPIRIT-KIT 11 Assembly Accessories ELMA Your Solution Partner FRONT SUB DIVISION VERTICAL FOR 3 U | 6 U ■ Allows both single and double eurocards to be mounted together in a 6 U Magic- and Spirit-Kit 11 Scope of delivery: ■ 1 divider extrusion front ■ 1 divider extrusion rear ■ 2 front extrusions ■ 2 internal extrusions ■ 1 assembly material Nominal width Tapped strips for front extrusion HORIZONTAL CARD MOUNTING KIT FOR DOUBLE EUROCARDS | 6 HE ■ For double eurocards (6 U) ■ Independent of card depth Scope of delivery: ■ 4 distance plates (2 front / 2...

Open the catalog to page 7

ELMA Your Solution Partner MOUNTING CHASSIS ■ For mounting non-standard modules and components ■ Mounting chassis is fixed directly to the side panel Scope of delivery: ■ 1 mounting chassis ■ 1 set of assembly material (4 earthing nuts, 4 screws M4 x 6) Mounting chassis depth 80 mm: Scope of delivery: ■ 2 contact strips EARTHING SET ■ Enables enclosures to be earthed in conformance with EN / VDE / SEV Scope of delivery: ■ 1 press-in threaded bolt M4 ■ 2 serrated lock washers ■ 2 nuts M4 ■ 1 clamp ■ 1 protective conductor symbol General accessories can be found in the brochure ''General...

Open the catalog to page 8