Catalog excerpts
General Accessories
Open the catalog to page 2• Front Extrusions • Internal, Center and Edge Connector Extrusions • Height and Height Divider Extrusions • Depth Extrusions • Different Extrusions
Open the catalog to page 41.1 Card Guides Standard acc. to IEC E | 1_3 1.1.2 Card Guides 7-Slot in 4 HP Steps 1.1.3 Card Guides 1-Slot, 3 Parts E | 1_4 1.1.4 Card Guide Board-Retention Bar E | 1_4 1.2 Rugged Screw mount Card Guides acc. to IEC E | 1_5 1.3 Card Guides Standard acc. to IEEE E | 1_7 1.3.2 Card Guides 1-Slot, incl. mounted ESD-Components E | 1_8
Open the catalog to page 51.4 Rugged Screw-mount Card Guides acc. to IEEE E | 1_10 1.5.2 uTCA Card Guide
Open the catalog to page 61.1 Card Guides Standard acc. to IEC • For positive location of circuit boards and plug-in units conforming to the dimensions of card depths 80 mm, 160 mm, 220 mm 150 and 280 mm (For card depth 160 mm) • The card guides are non-flammable, made from a high quality plastic material reinforced with fibreglass (UL94 V-0) • Including ESD provisions 81,3 (For rear card depth 80 mm) 150 150 (For card depth 210 (For card depth 160 mm) 160 mm) (For card depth 220 mm) 210 (For card depth 220(For card depth 220 mm) mm) 81,3 (For rear card depth(For mm 80 rea 1.1.1 Card Guides 1-Slot • Scope of...
Open the catalog to page 71.1.2 Card Guides 7-Slot in 4 HP Steps • For reduced assembly time of multiple slot applications • For use with single, double and triple eurocards with a depth of 160 mm • For card thickness: 1.6 mm / 0.06" • Black plastic, UL94 V-0 • ESD Clip not usable * Card guides must be supported in the middle by an additional extrusion (66-138) 1.1.4 Card Guide Board-Retention Bar 1.1.4 Card Guide Board-Retention Bar Description Assembly Material Description
Open the catalog to page 81.2 Rugged Screw mount Card Guides acc. to IEC • Simple assembly comparable to anchoring • Very high retention force • Shock and vibration proof • For positive location of circuit boards and plug-in units • For card thickness 1.6 mm / 0.06" and 2.0 mm/0.08" with anti-vibration feature • The card guides are nonflammable, made from a high-quality plastic material reinforced with fibreglass (UL94 V-0) • With ESD provision • Stainless steel PT-screw, Torque: 0,36 Nm 1.2 Rugged Screw mount Card Guides acc. to IEC • Scope of delivery: • Card guide, plastic UL94 V-0 • Security screw see 1.2.1 (at...
Open the catalog to page 91.2.1 Standard Mounting • With Stainless Steel Security Screw (from Top) Our ability to adapt existing components to your application, makes Elma your prefered solution partner.
Open the catalog to page 101.3 Card Guides Standard acc. to IEEE • For positive location of PCBs and plug-in units conforming to the dimensions of card depths 80 mm, 160 mm, 220 mm, 280 mm and 340 mm • The card guides are nonflammable, made from a high quality plastic material reinforced with fibreglass (UL94 V-0) • With ESD provisions • With keying and alignment pin possibilities 1.3.1 Card Guides 1-Slot • Card thickness 1.6 mm / 0.06" and 2.0 mm / 0.08" • Plastic UL94 V-0 Card Depth
Open the catalog to page 111.3.2 Card Guides 1-Slot, incl. mounted ESD-Components • Bottom: 1 ESD clip and 1 ESD spring • Top: 1 ESD spring • Black plastic UL94 V-0 1.3.2 Card Guides 1-Slot, incl. mounted ESD-Components
Open the catalog to page 12• Connecting printed board with case 1.3.5 ESD Spring • Connecting ESD pin with case • Note: Notch inward-looking 1.3.6 Coding Pins • Acc. to IEC 60297-3-103 • Plastic, UL94 V-0 • Can be rotated in 4 positions 1.3.6 Coding Pins Colour
Open the catalog to page 13• Simple assembly comparable to anchoring • Very high retention force • Shock and vibration proof • For positive location of circuit boards and plug-in units • For card thickness 1.6 mm / 0.06" and 2.0 mm/0.08" with anti-vibration feature • The card guides are nonflammable, made from a high quality plastic material reinforced with fibreglass (UL94 V-0) • With ESD provision • With keying and alignment pin possibilities • Stainless steel PT-screw, Torque: 0,36 Nm 1.4 Rugged Screw-mount Card Guides acc. to IEEE • Scope of delivery: • Card guide, plastic UL94 V-0 • Security screw see 1.4.1 (at...
Open the catalog to page 141 : Car d Gu id e s 1.4.2 Optional Mounting • With M2 screw, washer and nut (from Bottom) 1.4.2 Optional Mounting Description Cross recessed pan head screw M2x12, Inox Hexagonal nut M2 Inox Serrated lock washer Note: For highest security 2 sets/card guide, 4 sets/pair are necessary. nut M2 screw 1.4.3 ESD Clips • Connecting printed board with case 1.4.3 ESD Clips Description ESD clip front bottom/rear top ESD clip front top/rear bottom 1.4.4 ESD Spring • Connecting ESD pin with case • Note: Notch inward-looking 1.4.5 Coding Pins • Acc. to IEC60297-3-103 • Plastic, UL94 V-0 • Can be rotated...
Open the catalog to page 15The MicroTCA name and Logo are trademarks of the PCI Industrial Computers Manufacturers Group uTCA • The PICMG® Micro Telecommunications Computing Architecture (MicroTCA™) specification defines the requirements for a system that uses PICMG Advanced Mezzanine Cards (AdvancedMCs) directly on a Backplane. This specification, MicroTCA.0, defines the general mechanical, electrical, thermal, and management properties of a MicroTCA Shelf necessary to support AMC.0 compliant Modules. • MicroTCA has a primary purpose of serving as a platform for telecommunications and enterprise computer network...
Open the catalog to page 16• Fits on extrusion 66-242-X • Top and bottom use of card guide • Plastic, grey, UL94 V-0 • ESD clip can be assembled at front and rear 1.5.2 uTCA Card Guide Description 1.5.3 uTCA ESD Clip • Fits on uTCA card guide 61-193-00 • Stainless steel 1.5.3 uTCA ESD Clip Description • Fit into uTCA extrusion 66-242-XX • Steel, glavanised, passivated
Open the catalog to page 171.5.5 Countersunk Screw M3 x 6 mm • Cross recessed, Philips #1 • Steel, galvanised, passivated 1.5.5 Countersunk Screw M3 x 6 mm Description
Open the catalog to page 18All Elma Electronic AG catalogs and technical brochures
-
Compact Case 20 Datasheet
4 Pages
-
Banana Socket_Datasheet_E
2 Pages
-
Artificial Intelligence
4 Pages
-
The Elma OpenVPX ecosystem
4 Pages
-
Unibox 14_Datasheet_E
19 Pages
-
Systemkit 12K_Datasheet_E
25 Pages
-
Stylebox 15 e-motion_Datasheet_E
32 Pages
-
Elma RS Catalog_E
194 Pages
-
E33 Encoder_Datasheet_E
9 Pages
-
E37 Encoder_Datasheet_E
7 Pages
-
07_C07A Coded Switch_Datasheet_E
10 Pages
-
C07 Concentric_Datasheet_E
6 Pages
-
Classic Collet Knobs_Datasheet_E
11 Pages
-
LED_Datasheet_E
6 Pages
-
Elos Box 54_Datasheet_E
2 Pages
-
Guardbox 33_Datasheet_E
16 Pages
-
Varietybox 35_Datasheet_E
10 Pages
-
Guardbox 33 easy_Datasheet_E
5 Pages
-
iD-Box 16_Datasheet_E
2 Pages
-
Ecokit 11_Datasheet_E
9 Pages
-
Slimkit 10_Datasheet_E
6 Pages
-
C15 Coded Switch_Datasheet_E
3 Pages
-
E18 Encoder_Datasheet_E
7 Pages
-
Railway
32 Pages
-
Corporate Overview
12 Pages
-
Front Panel Printing Methods
1 Pages
-
iD-Box 16_Datasheet_E
2 Pages
-
Slimkit 10 FTTx_Datasheet_E
1 Pages
-
K1 Metal Knobs_Datasheet_E
3 Pages
-
M07 Coded Switch_Datasheet_E
5 Pages
-
C16 Coded Switch_Datasheet_E
3 Pages
-
C08 Coded Switch_Datasheet_E
6 Pages
-
Brochure iD-Box 16_E
8 Pages
-
Brochure BT Box 24_E
4 Pages
-
Brochure Shapebox 22_E
4 Pages
-
Subrack 38_Brochure_E
6 Pages
-
12R2 Rugged Chassis
2 Pages
-
Rotary Switches Brochure
4 Pages
-
19" Frontpanels
2 Pages
-
Power Supplies
8 Pages
-
ELOS Elma Open System
4 Pages
-
Elma bustronic
68 Pages
-
Optima stantron
80 Pages
-
PICMG
136 Pages
-
Optima stantron
25 Pages
-
PRESENTATION RACKS
1 Pages
-
Pioneer Standard
5 Pages
-
VITA Type 12 Chassis Platforms
32 Pages
-
Customisation_and_Services_E
16 Pages
-
19inch_Accessories_E
18 Pages
-
Elmaset_Frontpanels_Handles_E
80 Pages
-
Desktop_and_Compact_Cases_E
261 Pages
-
A_Elmaset_19Chassis_and_Sub_Rack_E
148 Pages
-
FLEXCOM
4 Pages
-
Defense
44 Pages
-
VITA Catalog
93 Pages
-
Elma Electronic PICMG Catalog
136 Pages
-
Optima Stantron Capabilities
16 Pages
-
Brochure Railway Solutions
16 Pages
-
System Platforms
2 Pages
-
Surelock Card Retainers
8 Pages
-
Rugged Cabinets
2 Pages
-
Brochure Embedded Computers
28 Pages
-
Brochure VPX and Open VPX
28 Pages
-
PRODUCTS FOR SCIENTIFIC RESEARCH
20 Pages
-
8016G-RS422-PMC-adapter
2 Pages
-
Datasheet Type 38 Cabinet
3 Pages
-
bo!sys-5030 - ITX
2 Pages
-
BO!SYS-6020 - EPIC
2 Pages
-
Datasheet bo!sys-5010 - ITX
2 Pages
-
bo!sys-1010 - COM Express
2 Pages
-
bo!sys-1020 - COM Express
2 Pages
-
bo!sys-5020 - ITX
2 Pages
-
Catalog Small Form Factor
28 Pages
-
CompactPCI Serial
16 Pages
-
VPX and OpenVPX by ELMA
28 Pages
-
ELMA 19"-MicroTCA blu!one
2 Pages
-
9289 XMCStor
2 Pages
Archived catalogs
-
MicroTCA
12 Pages
-
mtca4
12 Pages
-
Product & Services
12 Pages