Encoder E18 Datasheet - 7 Pages

Add to MyDirectIndustry favorites
Encoder E18 Datasheet

Catalog excerpts

ENCODER E18 Product description MAIN FEATURES MECHANICAL INCREMENTAL ENCODER ›› ›› ›› ›› ›› ›› ›› ›› ›› Body size: 14.4 x 11.4 x 6.5 mm Rotational life: Up to 150’000 revolutions Resolution: 16, 24 or 30 detents Detent torque: 0.5, 1.5 or 2.5 Ncm With or without push button Push force: 3 N, 6 N Gold plated sliding contacts IP60 and IP68 shaft sealing available Various shaft types in brass and stainless steel available Reflow ability Various options and customizations possible With and without push button THT or SMT reflow Threaded or non-threaded bushing Torque with 0.5, 1.5 or 2.5 Ncm Tray or tape & reel packaging Shaft mounted, separated or without shaft White goods applications Household applications Home automation Two way radio applications Power and heat distribution controls Water distribution controls Industrial controllers Audio a

 Open the catalog to page 1

ENCODER E18 Dimensions and pin assignment SWITCH DESIGN THT VERTICAL Example of illustration with thread Example of illustration without thread Vacuum plug for pick & place DRILLING DIAGRAM AND FOOTPRINT THT VERTICAL View from component side of the PCB View from component side of the PCB Print through hole PCB-thickness: 1 to 1.60 mm S-drilling only needed with push S-contacts only needed with push Dimensions in mm Tolerances according to DIN ISO 2768-1 (m), unless otherwise specified

 Open the catalog to page 2

ENCODER E18 Dimensions and pin assignment FRONT PANEL CUT OUT THREADED NON-THREADED Circuit diagram RECOMMENDED SYSTEM INTERFACE VCC 3x 10k (pull up) E18 S (Inverting Schmitt-trigger) Dimensions in mm Tolerances according to DIN ISO 2768-1 (m), unless otherwise specified

 Open the catalog to page 3

ENCODER E18 Ordering information ORDERING CODE E18 T Tray R Tape & reel with vacuum plug (SMT only, shafts separated) SHAFT TYPE See the next page for all available shaft types SHAFT (DELIVERY CONDITION) M Mounted S Separated (snap-in shaft mechanism) N No shaft 1 Shaft sealing (O-ring) of IP68 may slightly increase switching torque PUSH BUTTON 0 Without push button 3 3 N 6 6 N 1 8 PPR, B before A (16 detents) 2 12 PPR, A before B (24 detents) 3 15 PPR, A before B (30 detents) Shaft sealing (O-ring) of IP68 may slightly increase switching torque

 Open the catalog to page 4

Ordering information 1 Threaded bushing: Shaft to be ordered separately; shaft mounting after encoder assembly to front panel (nut does not fit over Ld" shaft diameter). OTHER SHAFTS ARE AVAILABLE ON REQUEST. SHAFT TYPES Type 31 - stainless steel Type 33 - stainless steel tx _ «4 Type 37 - stainless steel simps') 1 BivUJip/ t t -• * Knurl DIN 82-RAA 0 5

 Open the catalog to page 5

Blister box Tape & reel PACKAGING 50 pieces (nuts are supplied and packed separately) 200 pieces (only SMT, shafts and nuts are packed separately)ACCESSORIES AND SPARE PARTS Hex-nut M7 x 0.75: Part number 4516-40 (50 pieces / bag), brass, nickel platedSpecifications Mechanical data Switching torque: Rotational life: Allowable shaft load: Fastening torque of nut (front panel mounting): 16 positions 24 positions 30 positions 0.5, 1.5 or 2.5 Ncm (± 30 % new condition) Shaft sealing (O-ring) of IP68 may slightly increase switching torque > 150'000 revolutions with 0.5 Ncm (tested at room...

 Open the catalog to page 6

ENCODER E18 Specifications Environmental data Operating temperature: Storage temperature: Humidity: IP sealing against front panel: Vibration: Shock: Flammability: -40 to +85 °C (IEC 60068-2-14, method Nb) -65 to +105 °C (IEC 60068-2-14, method Nb) < 93 % relative humidity (MIL-STD-202G, method 103B, condition B) IP60 without sealing IP68 with shaft sealing (2 bar, 1 h) 9 Grms at 100 to 1 '000 Hz (MIL-STD-202G, method 214A, condition 1 h /15 min) 100 G (MIL-STD-202G, method 213B, condition C) UL94-V0 Gaskets UL94-HB < 300 °C during 3 s IPC/JEDEC J-STD-020C < 280 °C during 5 s Soldering...

 Open the catalog to page 7

All Elma Electronic catalogs and technical brochures

  1. Unibox 14

    43 Pages

  2. Elma bustronic

    68 Pages

  3. PICMG

    136 Pages

  4. FLEXCOM

    4 Pages

  5. Defense

    44 Pages

  6. VITA Catalog

    93 Pages

  7. SHAPEBOX 22

    4 Pages

  8. A47-Series

    2 Pages

  9. A4-Series

    3 Pages

  10. MicroTCA

    12 Pages

  11. mtca4

    12 Pages

  12. 9289 XMCStor

    2 Pages