Catalogs >
Elma Electronic AG >
Ecokit 11_Datasheet_E

Ecokit 11_Datasheet_E
9Pages

Catalog excerpts

CHASSIS AND SUBRACKS ECOKIT 11 Product description MAIN FEATURES The Ecokit is a subrack with side panels of aluminum. It is a cost-effective solution for Eurocards systems with depths of 160, 220 or 280 mm The special shapes on the side wall make it possible to securely fasten the front extrusions with only half as many screws. Side walls are of 2 mm aluminum 19'' height extrusions with 3 mm overlay (standard only) With cover plates suitable for use with vibrations exposure Side wall with integrated 19'' mounting bracket TYPICAL APPLICATIONS Standard: 19'' mounting brackets with height extrusions Integrated: 19'' mounting brackets integrated in side panel Simple electronics Applications in 19'' cabinets Height: 3 or 6 U Width: 42 or 84 HP Depth: 216 or 336 mm Aluminum clear anodized

Open the catalog to page 1

CHASSIS AND SUBRACKS ECOKIT 11 Product structure CONFIGURATION 1. WIDTH 42 or 84 HP (incl. assembly material | label strips) 3. HEIGHT AND DEPTH 3 or 6 U | 216 or 336 mm | with or without holes for handles CONSTRUCTION EXAMPLES ECOKIT 11 STANDARD Internal extrusion Internal extrusion Center extrusion Center extrusion Assembly material Assembly material Side wall Side wall Front extrusion Front extrusion Label strip Label strip Mounting brackets Tapped strips Tapped strips

Open the catalog to page 2

CHASSIS AND SUBRACKS ECOKIT 11 Product structure WIDTH ■ ■ ■ Width: 42 or 84 HP Other widths on request Set with or without center extrusion 2 front extrusions, aluminum, clear anodized 4 tapped strips M2.5 (6 for version with center extrusion) 2 internal extrusions 1 center extrusion (version with center extrusion only) Insulating strips (for backplane mounting only) Assembly material (torx screws) Description Standard set without center extrusion Set insulated backplane mounting without center extrusion Standard set with center extrusion Set insulated backplane mounting with centre...

Open the catalog to page 3

CHASSIS AND SUBRACKS ECOKIT 11 Product structure HANDLES U-HANDLE OF ALUMINUM Aluminum, anodized Width: 9 mm 1 aluminum handle 2 countersunk screw torx T20 (M4 x 10) Height DIE CAST ALUMINUM HANDLE Universal handle White aluminum, wet painted (RAL 9006) 1 aluminum handle 2 countersunk screws torx T20 (M4 x 10) Height

Open the catalog to page 4

CHASSIS AND SUBRACKS ECOKIT 11 Drawings and dimensions LINE DRAWING FRONT VIEW VIEW FROM ABOVE Adaptation kits RECESSED CARD INSTALLATION KIT For recessed mounting of Eurocards (without front panels) 3U 2 internal extrusions 2 tapped strips M2.5 Assembly material (8 cylinder head screws with torx T20 (M4 x 10) Width Mounting for recessed Eurocards (without front panels)

Open the catalog to page 5

CHASSIS AND SUBRACKS ECOKIT 11 Adaptation kits FRONT SUB DIVISION HORIZONTAL IEC FOR CARD GUIDES ■ ■ ■ ■ ■ ■ ■ ■ For sub division of front Possibility to mount card guides Built on a special extrusion Easy and quick assembly Cost effective solution Delivered in set form Usable width 84 HP Other widths on request 1 piece passivated front sub division extrusion 2 pieces tapped strips M2.5 4 pieces cylinder head screws torx T20 (M4 x 10) Description EMC front sub division horizontal IEC for card guides FRONT SUB DIVISION HORIZONTAL IEC ■ ■ ■ ■ ■ ■ ■ ■ For sub division of front Without...

Open the catalog to page 6

CHASSIS AND SUBRACKS ECOKIT 11 Adaptation kits EDGE CONNECTOR EXTRUSION Suitable for standard extrusion 66-144 Edge connector extrusion without assembly material clear passivated* *electrically conductive Assembly material: Description Assembly material M2.5 (for 2 supplementary extrusions) EDGE CONNECTOR EXTRUSION For use with a backplane mounting extrusion 66-193 Edge connector extrusion without assembly material clear passivated* *electrically conductive Assembly material: Description Assembly material M2.5 (for 2 supplementary extrusions)

Open the catalog to page 7

CHASSIS AND SUBRACKS ECOKIT 11 Assembly accessories FRONT SUB DIVISION VERTICAL 6 | 3 U ■ Single and double Eurocards (6 U) Scope of delivery: divider extrusion front divider extrusion rear front extrusions internal extrusions set assembly material (cross recessed) Front sub division vertical 6 | 3 U: ■ Other versions on request Width a Tapped strips for front extrusion: Scope of delivery 1 piece tapped strip HORIZONTAL CARD MOUNTING KIT ■ ■ ■ Double Eurocards (6 U) Independent of card depth Top and bottom cover plate when no overall fan front panel is used (has to be ordered separately)...

Open the catalog to page 8

CHASSIS AND SUBRACKS ECOKIT 11 Accessories PERFORATED COVER PLATES ■ ■ ■ ■ ■ 1 mm sheet aluminum, perforated Fastening on longitudinal and internal extrusion Thread in front and internal extrusion available Mechanical protection for the card area Cover plates for card depths 300 and 400 mm on request 1 perforated cover plates Enclosure width Enclosure depth Other widths and depths on request Assembly material: Description Cross recessed screw M3 x 6 Cylinder head earthing screw torx T10 (M3 x 6) Enables enclosures to be grounding in conformance with EN / VDE / NIV Lock washer Press-in...

Open the catalog to page 9