Catalogs >
Elma Electronic AG >
Unibox 14_Datasheet_E

Unibox 14_Datasheet_E
19Pages

Catalog excerpts

MAIN FEATURES The Unibox 14 be used as a subrack or as a desktop enclosure. The box has dimensions according to IEC60297 and versatile expansion options. The extruded aluminum frame works as a subrack as well as an enclosure (with easy-to-assemble powder coated metal sheets). The card can be installed at the front or rear. > Usable as subrack or desktop enclosure > Dimensions according to IEC60297 > Different adaptation options > Extruded aluminum frame can be used as a subrack or enclosure > Subracks can also be installed in cabinets with a cover panel > Card installation from the front or rear > When using telescopic or guide rails, only the width 81 HP can be used > For installing plug-in modules according to DIN41494 or IEC 60297 > Recessed mounting with a pitch of 75 mm is possible > With cover plates suitable for use in vibration applications ELMA Your Solution Partner PRODUCT VARIETY POSSIBLE CUSTOMIZATIONS ■ Subracks as desktop or 19'' version ■ Cover plates perforated or solid ■ Can be used without cover plates ■ Width: 42, 63 or 84 HP ■ Height: 2, 3, 4, 6 or 7 U ■ Depth: 232.6 to 532.6 mm TYPICAL APPLICATIONS ■ Laboratory equipment ■ Test and measurements device ■ Configurations with card slots

Open the catalog to page 1

DESIGN AND COMPACT CASE UNIBOX 14 Executions ELMA Your Solution Partner SETS UNIBOX 14 FRAME SET Scope of delivery: ■ 2 height extrusions front and rear ■ 4 front and rear extrusions ■ 4 depth extrusions ■ 2 handles 9 mm ■ 1 label strip ■ 1 set assembly material ■ Tapped strips, front / rear panel and cover panels have to Frame without 19'' height extrusions, with handles: Frame with 19'' height extrusions, with handles: Tapped strips: ■ Steel, zinc-plated ■ Suitable for frames Unibox 14 ■ Scope of delivery: 1 tapped strip

Open the catalog to page 2

SETS UNIBOX 14 COVER PANEL SET Scope of delivery: ■ 1 top cover panel, solid, RAL7035 fine structure silk gloss ■ 1 bottom cover panel with feet, solid, RAL7035 fine structure silk gloss ■ 2 side panels, solid, RAL7035 fine structure silk gloss ■ 1 set trim strips, RAL7035 fine structure silk gloss ■ 1 set rubber bands ■ 1 set assembly material ELMA Your Solution Partner

Open the catalog to page 3

DESIGN AND COMPACT CASE UNIBOX 14 Product structure CONFIGURATION 4. HANDLES Optional with handles 5. TOP COVERS solid or perforated | 42 / 63 / 84 HP 6. BOTTOM COVERS solid or perforated | 42 / 63 / 84 HP 3. HEIGHT 2/3/4/6/7U| with and without holes for handles 7. SIDE PANELS solid or perforated Top cover panel Side panel Trim strips Vertical section, rear Vertical section, rear Front extrusion 66-111 Vertical extrusion front Bottom cover panel, complete with feet Tapped strip 19” Vertical section, front

Open the catalog to page 4

DESIGN AND COMPACT CASE UNIBOX 14 Product structure frame ELMA Your Solution Partner WIDTH DEPTH Scope of delivery: ■ 4 front / rear extrusions ■ 4 tapped strips M2.5 ■ Assembly material: 1 set of philips screw M4 x 10 (63-109) Scope of delivery: ■ 4 depth extrusions Label strips: HEIGHT Scope of delivery: ■ 2 height extrusions (2 sets have to be ordered separately for front and rear) HANDLES Scope of delivery: ■1 handle (2 handles per enclosure and 2 screws per handle have to be ordered separately) Screw cross sloted countersunk

Open the catalog to page 5

ELMA Your Solution Partner DIMENSION DRAWINGS FOR SUBRACK WITH 19'' HEIGHT EXTRUSIONS Front view Side view View from above Width, height and depth for dimension drawings with and without 19'' height extrusions:

Open the catalog to page 6

ELMA Your Solution Partner TOP COVERS ■ One sided powder coated sheet aluminum 1.5 mm ■ Perforated available for better ventilation Scope of delivery: ■ 1 top cover panel Assembly material: ■ For mounting 1 top and bottom cover onto the frame BOTTOM COVERS ■ One sided film powder coated sheet aluminum 1.5 mm ■ Perforated available for better ventilation ■ With attached feet Scope of delivery: ■ 1 bottom cover panel

Open the catalog to page 7

ELMA Your Solution Partner Scope of delivery: ■ 1 side panel ■ Order 2 times for complete enclosure (left and right side)

Open the catalog to page 8

ELMA Your Solution Partner ■III::... l.lll SIDE PANEL FOR CROSSFLOW VENTILATION 412.6 Side panel 2 U Side panel 3 U Side panel 4 U Side panel 6 U

Open the catalog to page 9

ELMA Your Solution Partner Adaptation kits are used to subdivide the basic frame both in depth and height. Tapped strips have to be ordered separately. Information for adaptation kits a - e: 14-xxx- [x] for mounting: 0 = standard extrusion, 66-144 / 66-124 6 = backplane mounting 66-193 (isolated) Range of application: ■ Single Eurocards | depth 160 to 400 mm ■ Connector to IEC60603-2 / DIN41617 / MIL-C-21097 ■ Backplanes, modules, cassettes, plug-in units ■ Crossflow ventilation with 3 U fan module ■ Drive mechanism receptacles 3 1/2" | 5 1/4" ■ Horizontal mounting of single, double, triple...

Open the catalog to page 10

ELMA Your Solution Partner ADDITIONAL EXTRUSIONS RECESSED CARD MOUNTING Range of application: ■ Recessed mounting of Eurocards without individual front panels Scope of delivery: ■ 2 internal extrusions ■ 1 set assembly material (for recessed card mounting 2 sets are necessary)

Open the catalog to page 11

DESIGN AND COMPACT CASE UNIBOX 14 ELMA Your Solution Partner Assembly accessories HORIZONTAL INSTALLATION KIT ■ Double Eurocards (6 U) ■ Card depth independent ■ Can be installed recessed with additional internal extrusions ■ Top and bottom cover plate when no overall fan front panel (has to be ordered separately) Scope of delivery: ■ 4 distance plates (2 front / rear) ■ 4 internal extrusions (2 front / rear) ■ 1 center extrusion ■ 6 tapped strips M2.5 ■ 1 set assembly material Double eurocards = 52 HP Triple eurocards = 78 HP Mounting height Accessories PERFORATED COVER PLATES Width Cover...

Open the catalog to page 12

MOUNTING CHASSIS FOR FULL DEPTH ■ For mounting non-standard modules and components ■ Fixed directly to the depth extrusion ■ Aluminum 2 mm, raw Scope of delivery: ■ 1 mounting chassis ■ Fastening: Depth < 230 mm with 4 screws | > 230 mm with 6 screws ELMA Your Solution Partner

Open the catalog to page 13

ELMA Your Solution Partner Mounting chassis depth 200 mm: ■ The hole pattern allows single, double and triple Eurocards to be mounted Assembly material: EARTHING SET Enable subracks and enclosures to be earthed in conformance with VDE / SEV Scope of delivery: 1 earthing nut M4 1 Threaded bolt M4 1 terminal clamp 2 lock washer 1 nut M4 2 retaining rings 2 mm 1 earthing symbol Additional set for Unibox 14 with cover plates: ■ 2 earthing nut M4 ■ 2 lock washer ■ 4 retaining rings 2 mm ■ 2 earthing clips ■ 2 cross recessed screws M4 x 6 Earthing set for subracks without cover plates Earthing...

Open the catalog to page 14