Catalogs >
Elma Electronic AG >
Systemkit 12K Rail_Datasheet_E

Systemkit 12K Rail_Datasheet_E
6Pages

Catalog excerpts

CHASSIS AND SUBRACKS SYSTEMKIT 12K RAIL Produc description MAIN FEATURES Based on the Systemkit 12K, the 12K Rail was specially designed and tested for applications in the railway sector. It thus fulfills all technical requirements according to EN50155. Tested for SNCF approval Tested according to NF F61-005 and NFF 60-002 / NF F67-012 PRODUCT VARIETY › › › POSSIBLE CUSTOMIZATIONS › Can be combined with components from the Sytemkit 12K (e.g. EMC protection) TYPICAL APPLICATIONS › Rolling stock in railway section

Open the catalog to page 1

CHASSIS AND SUBRACKS SYSTEMKIT 12K RAIL Subrack SYSTEMKIT 12K RAIL SNCF | UNSHIELDED ■ ■ ■ SNCF listing No. 1306/058 Tested according to NF F61-005 and NFF 60-002 / NF F67-012 3 and 6 U, 21 T, 320 mm for board depth 160 and 220 mm 2 side panels 2 side panels extrusions 2 external guide rails 2 front extrusions 2 internal extrusions 2 height extrusions 2 insulation strips (4 pieces for 6 U) 1 double extrusion (6 U only) 4 tapped strips (6 pieces for 6 U) 1 rear frame (2 pieces for 6 U) 2 protection brackets SNCF (4 pieces for 6 U) 2 handles Assembly material (Torx) Systemkit 12K Rail SNCF 3...

Open the catalog to page 2

CHASSIS AND SUBRACKS SYSTEMKIT 12K RAIL Subrack SYSTEMKIT 12K RAIL SNCF | UNSHIELDED BOTTOM / TOP PANEL AT THE REAR ■ ■ SNCF-specific protection Material: Aluminium 1 mm 1 bottom / top cover panel Assembly material (4 x Torx M4 x 6, 1 x countersunk cross recessd M4 x 5) Bottom / top panel at the rear, solid, 66.2 mm Note: 1 T = 4 HP = 20.32 mm, Version 9 T (36 HP) available on request DRAWING SYSTEMKIT 12K RAIL SNCF | 6 HE SYSTEMKIT 12K RAIL EN50155 | UNSHIELDED ■ Subrack according to IEC and IEEE (CompactPCI) EEE version needs additional bottom / top panels Tested according to EN50155 3...

Open the catalog to page 3

CHASSIS AND SUBRACKS SYSTEMKIT 12K RAIL Subrack SYSTEMKIT 12K RAIL EN50155 | UNSHIELDED DRAWING SYSTEMKIT 12K RAIL EN50155 | 3 HE BOTTOM / TOP PANEL FOR EMC SHIELDING FOR SYSTEMKIT 12K RAIL SCNF AND EN50155 ■ ■ ■ To shield and protect the subrack Material: Aluminium, 1 mm Incl. EMC contacts 1 bottom / top cover panel Assembly material (10 Torx screws M3 x 6) Bottom / top panel perforated 84 HP (21 T), 208.6 mm (card depth 220 mm) Bottom / top panel perforated 84 HP (21 T), 148.6 mm (card depth 160 mm) Note: 1 T = 4 HP = 20.32 mm, Version 9 T (36 HP) available on reque

Open the catalog to page 4

CHASSIS AND SUBRACKS SYSTEMKIT 12K RAIL Accessories CODING STUD For SNCF back frame Galvanised steel Coding stud EMC SHIELDING MATERIAL BACKPLANE SHIELDING | VERTICAL ■ ■ Backplane can be used as a shielding rear panel For horizontal contact the internal extrusion has to be mounted without insulation strips Carrying plate has to be mounted directly on the side panel 2 carrying plates, aluminium, conductive incl. assemby material (Torx) 2 EMC contact strips For 6 U are 2 sets required Set backplane shielding | vertical | 3 U For front panels, fixing on extrusion Self-adhesive Scope of...

Open the catalog to page 5

CHASSIS AND SUBRACKS SYSTEMKIT 12K RAIL Accessories CODING STUD EMC GASKET | FOR HEIGHT EXTRUSION TO FRONT PANEL ■ ■ ■ One slot per front panel Application: height extrusion front/rear, front panel Gasket slides onto extrusion 2018 by Elma Electronic AG, CH-8620 Wetzikon. Subject to technical modifications, all data supplied without liability. Please contact our sales team for more details.

Open the catalog to page 6