Catalogs >
Elma Electronic AG >
Systemkit 12K_Datasheet_E

Systemkit 12K_Datasheet_E
25Pages

Catalog excerpts

ELMA Your Solution Partner MAIN FEATURES The Systemkit 12K is a high quality subrack system that high flexibility with wide functionality united. Completely made of aluminum, it already offers significant advantages in a standard version such as... > Choice between VME, VME64x or cPCI application > Possibility for rear I/O mounting > EMC level: Basic (already in the basic version without additional EMC parts) > RoHS compliant > Different heights and depths available > Accessory sets for individual expansion > Customizations on request PRODUCT VARIETY > Additional dimensions for special card depths > Combination of rear I/O and recessed card mounting > Horizontal and vertical divisions > Increased EMC protection with optional gaskets > Special equipment on request > Various sizes and colors > Individual interior design SIZES COLORS ■ 3 to 9 U (height units) ■ Clear passivated

Open the catalog to page 1

CHASSIS AND SUBRACKS SYSTEMKIT 12K Executions ELMA Your Solution Partner SPECIAL FEATURES The Systemkit 12K was tested according to the following norms: ■ Damp heat, cyclic ■Cold ■ Salt spray test EMC PROTECTION Electromagnetic comptability is the ability of a system to operate in the intended environment without causing or suffering unacceptable degradation of performance due to unintentinal electromagnetic radiation or response. The EMC character-stics of a system therefore consist of an appropriate immunity from interference (noise immunity) and a limited emission of interference (noise...

Open the catalog to page 2

ELMA Your Solution Partner Basic set-up *Rear I/O possible when front cards 160 mm only. No recessed mounting possible in combination with rear I/O. **Other configurations are available as customizations. CPCI (IEEE1101.10 / IEEE101.il) STANDARD CONFIGURATIONS* Card size Card depth Rear I/O card depth* Front mounting Recessed mounting Height reduction Base material Surface treatment Card depth Rear I/O card depth* possible possible possible possible possible possible possible possible possible Recessed mounting Height reduction Base material Surface treatment conductive conductive...

Open the catalog to page 3

ELMA Your Solution Partner Basic set-up Rear I/O possible when front cards 160 mm only. No recessed mounting possible in combination with rear I/O. **Other configurations are available as customizations. Part No. Card size Card depth Rear I/O card depth* Max. slot 80 mm 21 Front mounting Recessed mounting Height reduction Base material Surface treatment Possible EMC level possible possible possible aluminum conductive advanced possible possible possible aluminum conductive advanced possible possible possible aluminum conductive advanced possible possible possible aluminum conductive...

Open the catalog to page 4

CHASSIS AND SUBRACKS SYSTEMKIT 12K ELMAYour Solution Partner Application CPCI | VME64X | VME 19'' BASIC SET Scope of delivery: ■ 2 side walls ■ 4 front extrusions ■ 4 tapped strips M2.5 ■ 1 set assembly material (16 cylinder head screw torx T20 (M4 x 10)) cPCI application (IEEE1101.10 | IEEE1101.11): INTERNAL EXTRUSIONS INTERNAL EXTRUSIONS FOR INSULATAD BACKPLANE MOUNTING Scope of delivery: ■ 2 internal extrusions ■ 2 tapped strips M2.5 ■ 2 insulating strips ■ Assembly material (8 cylinder head screw torx T20 (M4 x 10))

Open the catalog to page 5

CHASSIS AND SUBRACKS SYSTEMKIT 12K ELMA Your Solution Partner Application INTERNAL EXTRUSIONS INTERNAL EXTRUSIONS FOR CONDUCTIVE BACKPLANE ASSEMBLY Scope of delivery: ■ 2 internal extrusions ■ 2 tapped strips M2.5 ■ Assembly material (8 cylinder head screws torx T20 (M4 x 10)) DOUBLE EXTRUSIONS FOR INSULATED BACKPLANE MOUNTING ■ For 6 U cards only ■ Stiffener for VME monolithic backplanes ■ Fixing for J1 and J2 backplanes Scope of delivery: ■ 1 double extrusion ■2 tapped strips ■ 2 insulating strips ■ Assembly material (8 x torx T20 (M4 x 6) | 2 x torx T20 (M3 x 10) | 2 x adapter) DOUBLE...

Open the catalog to page 6

CHASSIS AND SUBRACKS SYSTEMKIT 12K ELMA Your Solution Partner Range of application HEIGHT EXTRUSIONS FOR 19'' VERSION ■ Not suitable for telescopic rail mounting ■ Handles and EMC gaskets see below Scope of delivery: ■ 2 19'' height extrusions (front) ■ 2 height extrusions (rear) ALUMINUM HANDLE 9 MM (ANODIZED) Socpe of delivery: ■ 1 handle for height extrusions ■ Assembly material ■ Per subrack 2 handles have to be ordered DIE CAST ALUMINUM HANDLE (WET PAINTED RAL 9006) Scope of delivery: ■1 handle for height extrusions ■Assembly material ■ Per subrack 2 handles have to be ordered

Open the catalog to page 7

HEIGHT EXTRUSIONS FOR 19'' VERSION (FROM TELESCOPIC RAILS) HEIGHT EXTRUSIONS FOR ASSEMBLY OF TELESCOPIC RAILS Scope of delivery: ■ 2 19'' height extrusions (front) ■ 2 height extrusions (rear) ■ 2 die cast aluminum handles ■ Assembly material (4 countersunk screw torx T20 (M4 x 10)) Rugged telescopic rails, load capacity up to 90 kg / pair on request REDUCTION SET REDUCTION KIT i/3 U + 2/3 U FOR FRONT MOUNTING | SOLID ■ Material: Aluminum 1.5 mm, conductive, depth independent (to be used in conjunction with the bottom / top panel) ■ For 160 mm card depth, 4 U enclosure (Eurocards) | 7 U...

Open the catalog to page 8

REDUCTION SET ADDITIONAL FAN PLATE Scope delivery for additional fan plate (for easy access and maintenance of the fans): ■ 1 fan plate ■ 8 milled edge screw torx T10 (M3 x 5) REDUCTION KIT V3 U + 2/3 U FOR FRONT MOUNTING ■ Material: Aluminum 1.5 mm, conductive, depth independent (to be used in conjunction with the bottom / top panel) ■For 4 U enclosure (Eurocards) | for 7 U enclosure (double Eurocards) Scope of delivery: ■1 adapter (2/3 U) ■ No assembly material needed ■Per subrack 2 pieces (4 pieces with rear I/O) have to be used perforated version on request ELMA Your Solution Partner

Open the catalog to page 9

ELMA Your Solution Partner REDUCTION SET REDUCTION KIT V2 U + V2 U FOR 60 MM RECESSED MOUNTING ■ Material: Aluminum 1.5 mm, conductive, depth independant (to be used in conjunction with the bottom / top panel) ■ For 4 U enclosure (Eurocards) | for 7 U enclosure (double Eurocards) Scope of delivery: ■ 1 adapter bottom h/2 U) ■ 1 set assembly material (2 cylinder head screw torx T20 (M4 x 10)) ■ Per subrack 2 pieces have to be used ■ Note: The depth independent 0 U adapter are to be used in conjunction with the bottom / top panel perforated version on request BOTTOM / TOP PANEL SOLID ■...

Open the catalog to page 10