Instrument and Compact Cases

C h a pter Ov e r v ie w 1. Unibox 14 Universal case usable as sub rack or as desktop case 2. Stylebox 15 Elegantly designed EMC desktop or 19” case with excellent product features 3. Stylebox 15 e-motion Attractive looking EMC desktop or 19” case 4. Stylebox 15 smart Smart housing solution EMC requirements 5. iD-Box 16 Individual design housing for high-quality electronics 6. Classicbox 32 The classic of the desktop cases

7. Guardbox 33 Rugged EMC compact case with protection up to IP65 8. Guardbox 33 easy Rugged small enclosure with stylish design 9. Varietybox 35 Compact case with a very large variability and unlimited form factor 10. iD-Case 18 Designgehäuse mit vielfältigen Möglichkeiten 11. Compact Case 20 Designgehäuse

1.1.1 Complete Unibox 1 4 Kits B | 1_8 1.3 Cover Panel for Unibox 14 B | 1_9 1.3.2 Bottom Cover Panel with Attached Feet B | 1_10 1.4.3 Additional Extrusions Recessed Card Mounting B | 1_13 1.5.1 Horizontal Card Mounting Kit

1.6.1 Perforated Cover Plates 1.6.5 Flat Front Panels 1.6.6 Fan Front Panel 84 HP for Vertical Ventilation 1.6.7 Fan Front Panel for Horizontal Ventilation 1.6.8 Fan Front Panels for Direct Fan Mounting 1.6.9 Top / Bottom-Hinged Front Panel 1.6.10 Side-Hinged Front Panel 1.6.11 Extruded Front Panels 1.6.12 Front Panel with Cutout for IEC Ejector Handle 1.6.13 Card Locks and Card Handles 1.6.14 Card Holder acc. to IEC Standard 1.6.16 Protective Cover for 6 U Printed Board 1.6.19 Hexagonal Spacers M3 Thread 1.7.5 Edge Connector Extrusions

Usable as sub rack or as desktop case Card mounting from front and back Dimensions according to IEC 60297 Numerous adaptation options The extruded aluminium frame can be used as a sub rack as when clad powder- or with a set of easily fitted cover plates, transformed into a small table-top instrument case Rack mount complete with cover plates possible Panels and modules can be mounted from the front or the back Adaptation kits available for mounting modules Fitting of telescopic rails or guide rails only possible for 81 HP (upon request only) Can be employed as a desktop case or sub rack for mounting...

1.1.1 Complete Unibox 14 Kits You can find the most used complete kits below. With the new order structure (see "Configuration" B|1_6) you have however the possibility of configure your individual housing in different steps. Use this offer or contact us for further information or any other help. 1.1.1.1 Unibox 14 Frame Kit • Scope of delivery: • 2 front height extrusions (detail see 1.2.2) • 2 rear height extrusions (detail see 1.2.2) • 4 front/rear extrusions (detail see 1.2.1) • 4 depth extrusions (detail see 1.2.3) • 2 handles 9mm (detail see 1.2.2) • 1 label strip (detail see 1.2.1)...

1.1.1.3 Unibox 14 Cover panel Kit • Scope of delivery: • 1 top cover panel, solid, light grey (detail see 1.3.1) • 1 bottom cover panel with feet, solid, light grey (detail see 1.3.2) • 2 side panels, solid, light grey (detail see 1.3.3) • 1 set of trim strips (detail see 1.3.3.1) • 1 set of rubber bands (detail see 1.3.3.2)

1: Unibox 1 4 Configuration Frame - 42 HP / 63 HP / 84 HP (incl. assembly material)) - 2 U / 3 U / 4 U / 6 U / 7 U - slim/19" - with/without holes for handles - light grey - solid/perforated - width 42 HP 63 HP 84 HP , , - formed for backplane mounting Assembly Material Bottom Cover 1.3.2 Assembly Material - for top cover - light grey - solid/perforated - width 42 HP 63 HP 84 HP , , - formed for backplane mounting - for bottom cover - light grey - solid/perforated - height 2 U, 3 U, 4 U, 6 U, 7 U - depth 232.6 mm, 292.6 mm, 412.6 mm, 532.1 mm - colour: light grey - depth: 232.6 mm, 292.6 mm,...

1.2 Frame for Unibox 14 • Usable as sub rack • Different possibilities of card mounting • Dimensions according to IEC 60297 1.2.1 Width • Scope of delivery: • 4 front/rear extrusions • 4 tapped strips M2.5 • Assembly material: 1 set of screws cross recessed M4x10 (63-109) Screws cross sloted countersunk M4 x 10

1.2.3 Depth • Scope of delivery: • 4 depth extrusions

1.3 Cover Panel for Unibox 14 • One sided film powder coated or laminated sheet aluminium 1.5 mm • Perforated top and bottom covers are available for better ventilation • Bottom cover plates are supplied with feet attached • Sub rack can be mounted complete with cover plates in a cabinet • Formed top and bottom cover panels available for 84 HP for accomodation of backplane (drawing see 1.3.4.1) 1.3.1 Top Cover Panel • Scope of delivery: • 1 top cover panel

1.3.2 Bottom Cover Panel with Attached Feet • Scope of delivery: • 1 bottom cover panel

1: Unibox 14 1.3.3.1 Trim Strips 1.3.4.1 Line Drawing Cover Panel Formed for Accomodation of Backplane for 1.3.4.2 Line Drawing of Side Panel for Crossflow Ventilation Case Depth t

1.4 Adaptation Kits • Adaptation kits are used to subdivide the basic frame both in depth and height • Tapped strips have to be ordered separately, see 1.4.7 0 = standard extrusions, 66-144/66-124 (when supplementary edge connector extrusions are also used, see 1.4.8) 6 = backplane mounting 66-193 (insulating strips see 1.7.4.3) • Scope of delivery is shown in blue in the following illustrations • Tapped strip see 1.4.7 4.1 Adaptation Kit a Range of Application: • Single eurocard depth 160 - 400 mm • Connector to IEC 60603-2/DIN 41617/MIL-C-21097 • Motherboard • Modules, cassettes, plug-in units •...

1 : U nib ox 1 4 1.4.2 Adaptation Kit b • ange of Application: R • Single eurocards, depth 160 – 400 mm • Connector to IEC 60603-2 • Motherboard • Modules, cassettes, plug-in units • Vertical ventilation with 1 U fan module • for horizontal mounting of single, double, triple eurocards, depth 160 – 400 mm Set • Crossflow ventilation with 3 U fan module • Drive mechanism receptacles 31/2” / 51/4” Scope of delivery: • 3 internal extrusions • 1 front extrusion • 2 depth dividers • 1 set assembly material mm Front-mounting of single eurocards in a 4 U case with possibility of crossflow ventilation...