CODED SWITCH C08 ELMA Your Solution Partner Product description MAIN FEATURES MINIATURE DESIGN > Gray coding 16 positions > Switching mode: Shorting > Switching torque: 2.5 Ncm > Body size: 9 x 9 x 10 mm > Lowest profile PCB to shaft center line: 4.65 mm > Switching cycles 20'000 > THT horizontal > IP68 front panel sealing > Operating temperature range: -40 to +85 °C PRODUCT VARIETY ■ Threaded or non threaded bushing ■ With end stop or endless rotating ■ Front panel sealing IP60 or IP68 ■ Various shaft types ■ Tray or tape & reel packaging POSSIBLE CUSTOMIZATIONS ■ Shaft dimension and shape ■ Others TYPICAL APPLICATIONS ■ Frequency and channel selection for two way radios ■ Target aiming devices ■ Other miniaturized mobile applications

CODED SWITCH C08 ELMA Your Solution Partner Dimensions and pin assignment SMT THREADED SWITCH DESIGN SMT NON-THREADED 9 PIN ASSIGNMENT AND DRILLING DIAGRAM SMT NON-THREADED View from component side of the PCB SMT THREADED View from component side of the PCB THT NON-THREADED View from component side of the PCB Dimensions in mm Tolerances according to DIN ISO 2768-1 (m), unless otherwise specified

CODED SWITCH C08 ELMA Your Solution Partner Dimensions and pin assignmentFRONT PANEL CUT OUT SMT NON-THREADED View from component side of the PCBSMT THREADED View from component side of the PCB View from component side of the PCB M6 x 0,75 __ Dimensions in mm Tolerances according to DIN ISO 2768-1 (m), unless otherwise specified

CODED SWITCH C08 ELMA Your Solution Partner Ordering informationORDERING CODE T Tray (50 pieces / tray, donut supplied for SMT types) R Tape & reel (300 pieces / reel, donut supplied) PREFERENCE TYPES SELECTION CHART1 PACKAGING 1 For other types | options, see type key

CODED SWITCH C08 Ordering information PACKAGING Blister box: Tape & reel: O-RING MOUNTING TOOL Adhesive cover tape Label with part-no. Quantity and date code 1 Slip the lubricated O-ring over the bushing. 2 Slide the mounting tool over the bushing. 3 While pushing down the O-ring simultaneously rotate the mounting tool. TAPE & REEL PACKAGING End of empty tape Beginning of empty tape Adhesive cover tape Beginning of empty tape 6000 mm = 300 Coded Switches Label with part-no. Quantity and date code SOLDERING SUPPORT DONUT A soldering support donut is supplied on bushings with tape & reel packaging...

CODED SWITCH C08 ELMA Your Solution Partner Specifications MECHANICAL DATA Detent angle | positions: Rotary limitation | end stop: Switching torque: Rotational life: Rotational stop strength: Fastening torque of nut (front panel mounting): 22.5° detent angle | 16 positions Without or between first and last position 2.5 Ncm (±30 % in new condition) > 20'000 cycles (tested at room temperature) > 40 Ncm M6 x 0.75: < 100 Ncm ELECTRICAL DATA Electrical connection: SMT: Soldering surfaces THT: Pins 0.15 x 0.42 mm Switching voltage: Switching current: Contact surface: Signal | coding: Switching mode:...