C h a pter Ov e r v ie w 1. 19" Front Panels Solid and perforated front panels with the overall length of 19" in different surface treatments and heights up to 12 U. Despite their rugged construction, these are amongst the slimmest telescopic rails available on the market. Load capacity up to 90 kg/pair 3. 19" Ventilations The fan modules are designed for vertical and horizontal ventilation of a 19" rack and cabinets.

4. Keyboards High-quality compact keyboard trays 1 U in a very rugged metal housing with an ergonomic design.

1.1.1 Front / Rear Panels 19", solid, anodised D |4 1.1.2 Front / Rear Panels 19", solid, powdercoated D |4 3.2.4 Filter Set on Pressure Side of Fan Body D | 13 4.2.2 Keyboard Tray 19", 1 U, with Touchpad (RS232, PS/2) D | 15 4.2.3 Keyboard Tray 19", 1 U, with Touchpad (USB) D | 15

1.1 Front Panels 19"1.1.1 Front/Rear Panels 19", Solid, Anodised 1.1.1 Front/Rear Panels 19", Solid, Anodised • Aluminium 3 mm • Scope of delivery: • 1 front panel Other colours and heights available upon request

1: 19" Front Panels1.1.3 Fan Front Panels 19" • Aluminium 3 mm • Clear anodised • Scope of delivery: • 1 front panel • Assembly material see below

2.1 Telescopic Rails 60 kg Despite their rugged construction, these are among the slimmest telescopic rails avaiable on the market. All types can be locked in the extended position and are fitted with a quick release latch. The load carrying capacity of one pair is 60 kg. • Extremely slim, overall width only 6 mm • New type of corrosion-protected surface with high sliding properties • No additional lubrication necessary • Little frictional resistance with heavy loads • Selfunlocking plug-in function • Load capacity up to 60 kg/132 lb (US) / pair • Ease of assembly • No milling of front vertical...

2.2 Cable Carrier • The cable carrier can be easily installed and detached by removing the hinge bolt • The cable carrier is mounted on the rear vertical section • Scope of delivery: • 1 cable carrier Hinge pins

2: Telesc o p ic Ra ils 2.3 Line Drawings • Showing a 60 kg rail Dimensions Type Dimension from front edge of side panel of sub rack or enclosure Pitch dimension b 32.5 Bottom edge of sub rack

3.1 Fan Modules 19" • The fan modules are designed for vertical ventilation of 19" cabinets. • Modules for depths of 160 mm and 220 mm have 3 fans • These are arranged in an optimum configuration to ensure cooling of the PCBs over the entire width of the rack • Fan modules with 19" front panels are designed for use in 19" racks and cabinets • They can be run in and out on supporting rails • The modules have a 3-pole appliance inlet for connection to the mains 3.1.1 Fan Modules Vertical 19" • 230V/50Hz (115 V on request) • Scope of delivery: • 1 fan module 19" • Assembly material for mounting...

3.1.2.1 Assembled Ready for Connection 3.1.2.2 Assembly Material • For mounting fan modules in cabinets 3.1.3 Line Drawing and Technical Information Power Supply AMP connector, "M" series, 14 pole (pin) Standard in fan modules 84 HP assembled additionally

3.2.1 Handles for Fan Modules 19" • Scope of delivery: • 1 handle For Height Assembly Material Description 3.2.2 Front Filter Set • The front filter is fastened to the front panel of the fan body or the fan frontpanel 2 U / 84 HP using two captive screws • The filter mat can be re-used after washing in water with a temperature of up to approx. 40°C • Replacement filter mats can be ordered as spare parts 3.2.2 Front Filter Set • Scope of delivery: • 1 filter cradle, aluminium, clear anodised • 1 filter mat, polyester • 1 filter mat support, steel galvanised • 1 set of assembly material

3.2.3.1 Fans 12V DC • Brushless • Sealed ball bearings • Polarity and electronic locked rotor protection (autorestart) • Air exhaust in over struts (can be mounted directly on a perforated front panel) • Connector 2.8 x 0.5 (except fan with speed sensor) • Fan case and wheel plastic UL94 V-0 • Operating temperature -20 °C to +70 °C • CE, UL, CSA, VDE standard • Life expectancy L10 = 70 000 hours at 40 °C • Special configuration with speed sensor ** with free exhaust

3 : 19" Ventila tio n s 3.2.4 Filter Set on Pressure Side of Fan Body • • • • The filter set is fastened to the pressure side of the fan body by means of two quick-release fasteners The filter mat can be regenerated by washing in water at approx. 40°C The filter set can only be used wiht 2 U / 19" fan modules Replacement filter mat can be ordered as spare part (packet with 10 filter mats) 3.2.4 Filter Set on Pressure Side of Fan Body • Scope of delivery: • 1 filter catch, steel • 1 filter mat, polyester • 2 fastening elements • Temperature regulator with acoustic alarm signal • Simple conversion...

4.1 Keyboard Trays 1 U Overview High-quality compact keyboard for all applications Very rugged metal housing Single mechanical keys with gold contacts Designed for continuous use – more than 50 Mio. key presses Simple rack mount Additional versions with touchpad Country specific keyboard Ergonomic design Usable with standard drivers of the operating systems 4.1.1 Technical Data Enclosure: Dimensions (WxHxD): 19” x 1U x 300 mm Material : Galvanised sheet metal enclosure Weight: approx. 5 kg Colours: Front panel: • clear anodised • light grey (RAL 7035) • black (RAL 9005) Keyboard housing: • light...

• 1 adaptor PS/2 DIN (AT) (Touchpad-Version only) • 1 adaptor PS/2 — RS232 (Touchpad-Version only) 4.2.2 Keyboard Trays 19", 1 U with Touchpad (RS232, PS/2) Other country versions or colours available on request D | 15 Elmaset www.elma.com