Catalogs >
Elma Electronic AG >
07PL Coded Switch_Datasheet_E

07PL Coded Switch_Datasheet_E
7Pages

Catalog excerpts

CODED SWITCH 07PL ELMA Your Solution Partner MAIN FEATURES PUSH BUTTON FUNCTION > Integrated push button function > Push button forces up to 14 N > 10 positions BCD coding with end stop > 16 positions Hex or Gray coding with end stop > Switching mode: Shorting or non-shorting > For rugged environments > Switching torque: Up to 3.5 Ncm > Gold plated contacts > THT horizontal > IP68 front panel sealing (up to 5 bar) > Operating temperature range: -40 to +85 °C > Various options and customizations PRODUCT VARIETY ■ Shaft length ■ Shorting or non-shorting ■ Push button force ■ Hex, Gray or BCD coding ■ Switching torque: 3.2 or 3.5 Ncm ■ IP60 or IP68 front panel sealing POSSIBLE CUSTOMIZATIONS ■ Shaft dimension and shape ■ Bushing, mounting ■ IP sealing ■ Push button force ■Switching torque ■BCD coding TYPICAL APPLICATIONS ■ Frequency and channel selection for two way radios ■ Target aiming devices ■ Aircraft transponders ■ Medical equipment ■ Industrial automation ■ Cockpit applications

Open the catalog to page 1

CODED SWITCHAchse auf Pos. 0 07PL Dimensions and pin assignment SWITCH DESIGN 0 -0.018 SHAFT POSITION AT BCD CODING DRILLING DIAGRAM AND FOOTPRINT View from component side of the PCB Commons (C2, C3) must be connected together on the PCB Dimensions in mm Tolerances according to DIN ISO 2768-1 (m), unless otherwise specified le Al Bo Ø 9

Open the catalog to page 2

CODED SWITCH 07PL Dimensions and pin assignment FRONT PANEL CUT OUT Circuit diagram CONNECTIONS PUSH BUTTON Dimensions in mm Tolerances according to DIN ISO 2768-1 (m), unless otherwise specified

Open the catalog to page 3

CODED SWITCH 07PL Ordering informations ORDERING INFORMATION STANDARD: HORIZONTAL SHAFT WITH END STOP (HEX OR GRAY: 16 POSITIONS) 07PL PUSH BUTTON FORCE SWITCHING MODE N on-shorting not possible with Gray Code, BCD complementary, Hex complementary X Customized solutions on request D-SHAFT LENGTH CODING 13 Standard | 13.5 mm length 15 Standard | 15 mm length 16 Standard | 16 mm length XX Customized solutions on request Shaft dimensions and shape see drawing X Customized solutions on request Explanation see chapter «Technical explanations» TORQUE BUSHING | IP SEALING | NUT 10 Threaded | IP60...

Open the catalog to page 4

CODED SWITCH 07PL ELMA Your Solution Partner Ordering informations PREFERENCE TYPES SELECTION CHART1 STANDARD SHAFT, IP68, HEX NUT SUPPLIED, SHORTING PACKAGING Foam polystyrene box: 50 or 200 pieces (depending on shipment quantity) ACCESSORIES AND SPARE PARTS Hex nut M6 x 0.75: Part number 4424-22 (50 pieces / bag), brass Slotted nut M6 x 0.75: Part number 4424-28 (50 pieces / bag), brass Part number 4424-30 (50 pieces / bag), stainless steel 1 For other types | options see ordering code

Open the catalog to page 5

CODED SWITCH 07PL ELMA Your Solution Partner Specifications MECHANICAL DATA Detent angle | positions: Rotary limitation | end stop: Switching torque: Rotational life: Rotational stop strength: Fastening torque of nut (front panel mounting): 22.5° detent angle | 16 positions 36° detent angle | 10 positions Configurable 2.2 or 3.5 Ncm (±25 % in new conditions) > 10'000 cycles (tested at room temperature) > 35 Ncm M6 x 0.75: < 100 Ncm ELECTRICAL DATA Electrical connections: Switching voltage: Switching current: Contact resistance: Switching | breaking capacity: Signal | coding: Switching mode:...

Open the catalog to page 6

CODED SWITCH 07PL ELMA Your Solution Partner Specifications MECHANICAL DATA FOR PUSH BUTTON Actuation force: Travel: Lifecycles: 3, 5, 10, 14 N (±30 % in new condition) 0.5 (±0.2) mm > 200'000 cycles (tested at room temperature) < 1 0 < 15 VDC (resistive load) < 10 mA (resistive load) < 2 ms (at 2 Hz) ELECTRICAL DATA FOR PUSH BUTTON Contact resistance: Switching voltage: Switching current: Contact bouncing: ©Copyright 2018 by Elma Electronic AG, CH-8620 Wetzikon. Subject to technical modifications, all data supplied without liability. Please contact our sales team for more details. China:...

Open the catalog to page 7