video corpo

S70R

S70R

S70R

Product catalog summary
Technical Specifications Overview
The S70R is a versatile piece of equipment designed for high-reach tasks. It features a working height of 75 feet (22.9 meters) and a side reach of 65 feet (19.8 meters). The platform has a capacity of 900 lbs (408 kg) and measures 28x120 inches (71x305 cm). The unit is equipped with a SkyWalk™ platform and powered by three boom sections.

Platform and Controls
The platform includes safety features such as lanyard attachment loops and harnesses. It is leveled using a hydraulic "closed" system with remote releveling controls. The platform controls consist of four electronic controllers for precise operation, with additional controls for engine speed and start/stop functions.

Outriggers and Frame
The S70R is equipped with main and auxiliary outriggers with an 18-foot spread. The frame is a one-piece, welded box-type with integral outrigger mounts. The turret allows for continuous rotation driven by a hydraulic motor.

Boom and Hydraulic System
The boom is constructed from steel rectangular tube sections and includes a single-acting lift cylinder. The hydraulic system operates at approximately 2,500 PSI and includes a 70-gallon oil tank. The system is designed with safety features such as holding valves and reinforced hoses.

Installation and Accessories
The unit is installed on a truck chassis with specific requirements, including a 144-inch cab-to-axle measurement and a 48,000 lb GVWR. Various options are available, such as different capacity boom winches, platform jibs, and bed accessories.

Chassis Data
The minimum chassis requirements include a wheelbase of 211 inches and specific axle weight ratings. The actual dimensions will vary based on truck selection.

Contact Information
Elliott Equipment Company, located in Omaha, NE, provides further details and support through their contact channels.
See more

Catalog excerpts

S70R-1

S70R TECHNICAL SPECIFICATIONS S70R SIDE VIEW DIAGRAM • Working Height 75'/22.9 m • Powered Boom Sections • Working Side Reach 65'/19.8 m • Overall Height • Platform Capacity 900 lbs/408 kg • Platform Size 28x120 in/71x305 cm • Platform Type SkyWalkTM • Lifting Capacity (Main Winch) • Lifting Capacity (Jib Winch) 3 13’6”/4.1 m • Unit Weight (Bare) 21,000 lbs/9,525 kg • Outrigger Spread Main 18'/5.5 m • Outrigger Spread Auxiliary 18’/5.5 m 5,900 lbs/2,676 kg • Front Gross Axle Weight Rating 14,000 lbs/6,350 kg 500 lbs/227 kg • Rear Gross Axle Weight Rating 34,000 lbs/15,422 kg Elliott Equipment Company 4427 South 76th Circle Omaha, NE 68127 Phone: 402-592-4500 Fax: 402-592-4553 Email: [email protected] www.elliottequip.com

 Open the catalog to page 1
S70R-3

TECHNICAL SPECIFICATIONS MAXIMUM WORKING LOADS MAXIMUM WORKING LOADS CRANE OPERATION WINCH LINE LOAD (POUNDS) WITH PLATFORM ATTACHED (NO JIB) USE OUTRIGGERS AT ALL TIMES • AVOID JERKING LOAD USE 2 PART LINE FOR LOADS OVER 2500 LBS. DEDUCT 350 lbs. WITH JIB INSTALLED IN PLATFORM EQUIPMENT COMPANY DO NOT PAINT OVER ANY LABELS 030405 1090210 EQUIPMENT COMPANY Elliott Equipment Company Email: [email protected]

 Open the catalog to page 3
S70R-4

MAXIMUM JIB WORKING LOADS MAXIMUM WORKING LOADS WINCH LINE LOAD (POUNDS) WITH PLATFORM ATTACHED (NO JIB) USE OUTRIGGERS AT ALL TIMES • AVOID JERKING LOAD EQUIPMENT COMPANY DO NOT PAINT OVER ANY LABELS 030405 1090710 EQUIPMENT COMPANY Elliott Equipment Company Email: [email protected]

 Open the catalog to page 4
S70R-5

HIREACH - S70R TECHNICAL SPECIFICATIONS CHASSIS DATA S70R Wheelbase (WB) 211” / 536 cm Cab to Axle (CA) 144” / 366 cm Cab to End of Frame (EOF) 244” / 620 cm Frame Section Modulus 16.6 in3 / 120,000 psi Front Axle Gross Weight Rating 14,000 lb / 6,350 kg Rear Axle Gross Weight Rating 34,000 lb / 15,422 kg E xtended Front Frame N/A Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. OPTIONS Radio Remote Control Interference protected radio remotes let you get closer to your work and have full...

 Open the catalog to page 5

All Elliott Equipment Company catalogs and technical brochures

  1. 32117F

    7  Pages

  2. 30105F-D

    7  Pages

  3. 36127F

    7  Pages

  4. 45142

    10  Pages

  5. 50105R

    11  Pages

  6. 1838F

    5  Pages

  7. 1560F

    5  Pages

  8. 1056F

    4  Pages

  9. 1047F

    4  Pages

  10. 1039F

    4  Pages

  11. I85F

    5  Pages

  12. M85

    4  Pages

  13. G85R

    6  Pages

  14. I70F

    5  Pages

  15. H70F

    5  Pages

  16. G72R

    4  Pages

  17. H70R

    5  Pages

  18. H60F

    4  Pages

  19. I60F

    5  Pages

  20. G50F

    4  Pages

  21. V60F

    4  Pages

  22. L60R

    5  Pages

  23. H55F

    4  Pages

  24. L55R

    5  Pages

  25. S50F

    4  Pages

  26. S50R

    5  Pages

  27. I50F

    4  Pages

  28. M43

    4  Pages

  29. G40F

    5  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.