Catalog excerpts
M85 TECHNICAL SPECIFICATIONS M85 SIDE VIEW DIAGRAM • Working Height 87'/26.5 m • Powered Boom Sections • Working Side Reach 74'/22.5 m • Overall Height • Platform Capacity 750 lbs/340 kg • Platform Size 30x54 in/76x137 cm • Platform Type End-Hung 3 13’/3.9 m • Unit Weight (Bare) 13,500 lbs/6,123 kg • Outrigger Spread Main 18’/5.5 m • Outrigger Spread Auxiliary 12’/3.6 m • Lifting Capacity (Main Winch) N/A • Front Gross Axle Weight Rating 10,000 lbs/4,536 kg • Jib Winch • Rear Gross Axle Weight Rating 19,000 lbs/8,618 kg 500 lbs/227 kg Elliott Equipment Company 4427 South 76th Circle Omaha, NE 68127 Phone: 402-592-4500 Fax: 402-592-4553 Email: sales@elliottequip.com www.elliottequip.com
Open the catalog to page 1
HIREACH - M85R TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Maximum Platform Height: 82' ground to platform floor. piece weldment. Turret rotates on large diameter ball bearing. Working Range: 87' max. height and 60' max. side reach. Rotation: Continuous turret rotation with no stops. Hydraulic motor drives turret through dual self-locking gear box. Work Platform: 30”x54" nonremovable end-mount work platform with 40" high rails. Equipped with two safety lanyard attachment loops and two safety harnesses and 72" lanyards. Platform capacity 750 lbs. Platform Leveling System: Hydraulic...
Open the catalog to page 2
TECHNICAL SPECIFICATIONS MAXIMUM RANGE AND JIB CAPABILITIES MAXIMUM WORKING LOADS TOTAL PLATFORM CAPACITY (JIB LOAD PLUS PERSONNEL) USE OUTRIGGERS AT ALL TIMES AVOID JERKING LOAD JIB 500 LBS. MAXIMUM PERSONNEL 750 LBS. MAXIMUM DO NOT PAINT OVER ANY LABELS Elliott Equipment Company reserves the right to change the specification of any unit at any time without prior notice. This brochure is only a statement of general specifications on the date of this publication. For more detailed info on specific Elliott trucks go to www.elliottequip.com EQUIPMENT COMPANY Elliott Equipment Company Phone:...
Open the catalog to page 3
TECHNICAL SPECIFICATIONS HIREACH - M85 CHASSIS DATA M85 Wheelbase (WB) 222” / 655 cm Cab to Axle (CA) 156” / 488 cm Cab to End of Frame (EOF) 273” / 820 cm Frame Section Modulus 10.8 in3 / 120,000 psi Front Axle Gross Weight Rating 10,000 lb / 4,536 kg Rear Axle Gross Weight Rating 19,000 lb / 8,618 kg Extended Front Frame N/A Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. OPTIONS Non-CDL Chassis Options Take advantage of the low chassis GVWR requirements by mounting your HiReach on a...
Open the catalog to page 4All Elliott Equipment Company catalogs and technical brochures
-
Elliott_HiReach_M872 Pages
-
Elliott_HiReach_L652 Pages
-
32117F7 Pages
-
30105F-D7 Pages
-
36127F7 Pages
-
4514210 Pages
-
50105R11 Pages
-
1838F5 Pages
-
1560F5 Pages
-
1056F4 Pages
-
1047F4 Pages
-
1039F4 Pages
-
I85F5 Pages
-
G85R6 Pages
-
I70F5 Pages
-
S70R5 Pages
-
H70F5 Pages
-
G72R4 Pages
-
H70R5 Pages
-
H60F4 Pages
-
I60F5 Pages
-
G50F4 Pages
-
V60F4 Pages
-
L60R5 Pages
-
H55F4 Pages
-
L55R5 Pages
-
S50F4 Pages
-
S50R5 Pages
-
I50F4 Pages
-
M434 Pages
-
G40F5 Pages