I85F
5Pages

I85F TECHNICAL SPECIFICATIONS I85F SIDE VIEW DIAGRAM • Working Height 90'/27.4 m • Powered Boom Sections • Working Side Reach 59'/17.9 m • Overall Height • Platform Capacity 600 lbs/272 kg 4 11’7”/3.5 m • Unit Weight (Bare) 18,500 lbs/8,391 kg • Platform Size 40x60 in/102x152 cm • Outrigger Spread Main • Platform Type Insulated Top-Mount • Outrigger Spread Auxiliary • Lifting Capacity (Main Winch) • Insulation Rating 18'/5.4 m 8’/2.4 m 3,650 lbs/1,656 kg • Front Gross Axle Weight Rating 14,000 lbs/6,350 kg 46KV Category C • Rear Gross Axle Weight Rating 34,000 lbs/15,422 kg Elliott Equipment Company 4427 South 76th Circle Omaha, NE 68127 Phone: 402-592-4500 Fax: 402-592-4553 Email: sales@elliottequip.com www.elliottequip.com

HIREACH - I85F TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Maximum Platform Height: 85' ground to platform floor. Working Range: 90' max. height and 59' max. side reach. Work Platform: 40x60" fiberglass topmount work platform with 40" high rails and a grated fiberglass floor. Equipped with two safety lanyard attachment loops, two safety harnesses, and two lanyards. Platform capacity is 600 lbs. Platform Leveling System: Hydraulic "closed" system consisting of twin platform cylinders interacting with a boom-actuated master cylinder mounted in boom support turret. System provided with...

TECHNICAL SPECIFICATIONS MAXIMUM RANGE CAPABILITIES PLATFORM WORKING RANGE ABRUPT AUTOMATIC STOP AREA ON BOOM ANGLE INDICATOR (LOCATED BELOW PLATFORM) DO NOT PAINT OVER ANY LABELS EQUIPMENT COMPANY EQUIPMENT COMPANY Elliott Equipment Company Email: sales@elliottequip.com

TECHNICAL SPECIFICATIONS MAXIMUM WINCH LIFTING CAPABILITIES MAXIMUM WORKING LOADS CRANE OPERATION WINCH LINE LOAD (POUNDS) WITH BUCKETS OR PLATFORM REMOVED USE OUTRIGGERS AT ALL TIMES -AVOID JERKING LOAD DEDUCT 400 POUNDS WITH BUCKETS OR PLATFORM ATTACHED DO NOT PAINT OVER ANY LABELS EQUIPMENT COMPANY EQUIPMENT COMPANY Elliott Equipment Company Phone: 402-592-4500 Omaha, NE 68127 Email: sales@elliottequip.com

HIREACH - I85F TECHNICAL SPECIFICATIONS CHASSIS DATA I85F Wheelbase (WB) 211” / 536 cm Cab to Axle (CA) 168” / 427 cm Cab to End of Frame (EOF 315” / 800 cm Frame Section Modulus 16.6 in3 / 120,000 psi Front Axle Gross Weight Rating 14,000 lb / 6,350 kg Rear Axle Gross Weight Rating 34,000 lb / 15,422 kg Extended Front Frame Required for Front Stabilizer Chassis data is minimum general requirements-not for engineering. Actual dimensions and truck data will depend on truck selection and axle configuration. OPTIONS Radio Remote Control Interference protected radio remotes hardwired to the...